Reputation: 0 Neutral
- Active Posts:
- 12 (0.01 per day)
- Most Active In:
- Custom Painting (5 posts)
- 29-July 08
- Profile Views:
- Last Active:
- Jun 20 2011 08:41 PM
- Member Title:
- Forum Newbie
- Age Unknown
- Birthday Unknown
- Not Telling
Posts I've Made
26 March 2010 - 01:58 PMi would build a right feed autocoker 2000+
mid block job with a milled of right tube being able to have a qbow/long bow style kit and a warp feed. a slider style frame milled for a e2 would be a big +. id want to get the upper and lower tube to be polished. it would be runing cp 14 inch barrel milled for freak inserts and have a cp asa and reg. oh and i would mill of that anoying sight rail that runs down the center and replace it with removable pictany rails so i could run a nice red dot then get a dark digi duracoat job on it
ive got about 50 other projects id like to do mostly with cockers, pgps and guns of that sort
02 August 2009 - 12:17 AMActually, there are two kinds of slg's. The ultralite version, and the regular. You will probably want to get a better barrel, but besides that just get out and play. Once you start playing with it you will realize what kinds of upgrades you will need. Just make sure you have a good hopper, and I believe you can use co2 on a slg, but I would recommend using hpa.
its a spolie gun and i dont think it would like co2
01 August 2009 - 11:59 PMLots of guns are successfully powdercoated, although they're mostly the old brass Sheridans, mostly done by PPS, and custom finishers such as MadCustoms and KCPS.
Here's a powdercoated gun:
you did a powdercoat finish on a brass gun dang i think they look nice polished or nickel plated although powder coat stays clean and i think you have to polish the brass every half a year or so and nickel plating is expensive
31 July 2009 - 10:58 AMMANN- The threads a little dead right now, so its hard to see what everyone's thoughts are.
Stroked- Nice find man on the body, and let me know for sure if you want in on this.
And here's some updated pics of my work. Currently I have an old school Female Stab on the bottomline with the stock (not pictured here). And I'm still waiting for my clamping feedneck and Pump handle back from JCurt, he is putting a hittmann mod in it. Other than that I have all the pieces I need. Then its off to anno somewhere. Here's a few to show her off:
And I actually made some parts for the stock so that the female stab is usable on it, and so it is visually more appealing, but those are not shown either, forgot them in the shop along with the female stab.
i think a mid block would have looked awsome on that superstock body and then use a ccm kit with the new handle from the t2 thats what i want to do if i ever get the extra money and dont use it on playing
28 June 2009 - 07:28 PMpowdercoat is very cheap i can get a bike done for 80 thats with the guy doing every thing to but even more the powder is very cheap 10$= 8 ounces and goes a long way i think its 3 spraypaint cans worth for every 8 ounces of powder so not to pricey