Special Ops Paintball: ALIHISGREAT - Viewing Profile - Special Ops Paintball

Jump to content

ALIHISGREAT's Profile User Rating: -----

Reputation: 0 Neutral
Active Posts:
58 (0.02 per day)
Most Active In:
Paintball Accessories (26 posts)
29-January 08
Profile Views:
Last Active:
User is offline Aug 21 2010 11:45 AM

My Information

Member Title:
Forum Member
Age Unknown
Birthday Unknown
Not Telling Not Telling

Contact Information


Previous Fields

Latest Visitors

Posts I've Made

  1. In Topic: How to use First strike Rounds in a different gun+How to make your own

    17 November 2009 - 12:56 PM

    I'm currently it the middle of a first strike project.

    My plan:

    1. Buy Trracer Pump
    2. Buy first strike rounds
    3. Mod Tracer feed to accept first strike rounds
    4. Take off pump and fashion a bolt action system that hods the bolt back for loading
    5. Buy stock
    6. Go play


    look at this video for the general gist of what i hope to achieve but minus the stock, i am going for the light and functional look...


    oh and as for making your own... it realistically will be very very very hard to get consisten enough rounds to make it worthwhile.
  2. In Topic: Where's the worst place you've been hit with a paintball?

    22 June 2009 - 05:22 AM

    Most painful - hands (i wear protection for my danglies :angry: )

    Weirdest - didn't happen to me - A team mate was wearing a Shemagh/scarf around his neck and about 3 games in a row he got paintballs stuck in it.
  3. In Topic: ION XE - Airsoft M4 conversion?

    11 May 2009 - 10:39 AM

    View Postjosef_k, on May 11 2009, 04:45 AM, said:

    Instead of having to cut a hole through the top of your receiver for a conventional hopper in addition to having to shoehorn the regulator into a cosmetic magazine shell, how about inverting the XE body so that it feeds from the magazine location and relocate the regulator into the buttstock, using a slightly longer length of tubing? I'm sure the board could still be located near the trigger group location.

    the feedneck would come out at a 45degree angle so it would come out of the ejector port, sorry, i didn't really make it clear.
  4. In Topic: Cutting the front grip off a 98

    05 May 2009 - 09:04 AM

    View PostF-3, on May 5 2009, 03:08 AM, said:

    I will never understand why you would pay extra for a 98C and hack the foregrip off, rather than just spend less and get a BT-4 (A 98C with no fixed foregrip).

    maybe its because my mod doesn't require the rail... and the dimensions would be wrong for the BT-4 height wise.
  5. In Topic: ION XE - Airsoft M4 conversion?

    03 May 2009 - 03:20 AM

    i've updated my plan!

    My very rough plan:
    Take an old style ION cut off the front part containing the barrel threads, put it inside an M4/16 metal airsoft body with the threads tapped into the receiver (the front part where d-rings/fore-grips screw on.) mount the board somewhere above/around the trigger, put the reg inside the mag and fit the battery wherever i can.

    now to give credit where it's due, my inspiration comes from Uhlan's mod found here... http://todd.mainecav...l/m16/progress/

    Posted Image

    green = reg
    orange = board, tubes and banjos etc.
    red=body tube
    blue = threads cut into body

    Posted Image


ALIHISGREAT hasn't added any friends yet.


ALIHISGREAT has no profile comments yet. Why not say hello?