Reputation: 0 Neutral
- Active Posts:
- 259 (0.11 per day)
- Most Active In:
- Mechanical Markers (64 posts)
- 30-April 07
- Profile Views:
- Last Active:
- Member Title:
- Forum Member
- 25 years old
- May 28, 1988
- SW, VA
- Website URL:
Topics I've Started
20 September 2007 - 01:41 PMWell I bought the MR SAW stock when they first came out but mutch to my disappointment there wasn't an air thru stock version so I finally made one.
Warning this requires drilling holes in the stock so if you mess up when drilling it's not my fault and am no way responsible for it.
Edit 9/21: Tools and suggestion
Edit 9/25: Pics and suggestion
Things you are goin to is Macro line approx. 2 ft., a 90 degree fitting, a straight fitting (personally I'm goin to ad a 90 degree elbow to the gun but this requires drilling a 5/8" whole in the hand guard), 1/8" npt female fitting, teflon tape, metric to 1/8" fitting, a drill and 17/64" drill bit, a remote preferally with slide check, and assorted tools (1/2" & 7/16" & 9/16" & 13mm wrenchs, 4mm & factory allen wrenchs, 8" adjustable wrench, wire cutters, pliers).
First you need to apart the stock by removing the screw in the back with an allen wrench.
Then take your drill and bit and drill out the hole on the left side of the stock and ad another hole in the center of the plastic right below the rod slot.
Next you nee to run the macro line through the holes then put the 90 degree fitting on.
Attach the 1/8" female fitting on the 90 degree and align it up with the whole on the bottom of the stock. Now take the male part of the remote and wrap it in teflon tape and screw it into the 1/8" female fitting.
Now take off the hand shroud, bottom line, and hose. Slide the hand shroud down the macro line then put the straight fitting on the the metric adapter. Now screw it in to were you removed the bottom line hose from, also make shure you leave enough slack in the line to pull the stock off and adjust the velocity.
I'll have pics up tomorrow after I fet home.
05 September 2007 - 09:52 AMWolf's Ridge paintball is going to be holding a Black Hawk Down scenario on 9/29. Field fee is going to be around $25. There is supposed to be a pilot rescue along with some other missions. The militia is supposed to out number the Americans about 2 to 1.
Edit: here is the fields website
I'll post more up once I get more information about the game from madkow.
Edit: Field fee is set at 25 per a person which includes all day air field paint is going to be normal price and you can bring your own paint if you wish.