- Active Posts:
- 39 (0.02 per day)
- Most Active In:
- Mechanical Markers (12 posts)
- 16-December 06
- Profile Views:
- Last Active:
- Jul 25 2011 01:47 PM
- Member Title:
- Forum Newbie
- Age Unknown
- Birthday Unknown
- Click here to e-mail me
Topics I've Started
09 August 2008 - 07:56 PMHey guys, I looked it up but didn't find something close, at least I think so...
Well first of all my Tac-one has the Lvl 10 with ULT..... with out the ULT on/off there is no problem...BUT... once I install it (ULT) and start shooting, sometimes the TRIGGER ROD (little pin behind the trigger) doesn't come out enough so I can shoot the again (I was dry firing) , and I am fully releasing the trigger...I actually have to de-gas and re-gas it in order for it to come back out, I saw on other threads that you can probably push it back in, is this a normal thing to do?
I have an output pressure of 800-850 psi and my tank is at it's higest capacity 3000 psi, so that's definitely not the problem...
Also, I have 6 shims inside my ULT...I tried 8 but AUTO-FIRED, tried 7 and DOUBLE-FIRED, and at the end with 6 shims it was working as a normal semi-automatic...
Could this probably mean that I have to change carriers inside my Lvl 10 or is it a problem with the ULT on/off..? I am going to call AGD on Monday, but some help would come in handy... THANKS GUYS!
20 November 2007 - 11:53 AMHey there guys, Ive used some proto paintballs with this, but I would like to hear more opinions besides "using thick shell paintballs" If you guys could be more specific on brands , that would be good, thanks!
29 September 2007 - 09:30 AMI currently have an AG, I have played with it a couple of times(7). My body temperature is always hot, therefore, I sometimes overheat and can't last too long on the field (Not to mention that I only play with my boxers on, and hydrate before and after). Another critical thing is my AG Hood. This thing, when playing, makes it very difficult because my goggle's lense fogs right away (even with the best anti-fog spray on the market). I also have the Q-bow with me , although it is not too heavy, when you combine heatness, ghillie, and fog, the heaviness starts to kick in!
I was wondering if maybe I should do the following, take a lot of ghillie off of my suit, and also grab some ghillie and tie it directly to my goggles (has anyone tried this before?) I think the mesh makes it a lot hotter for me. Maybe I could just play with the Fusion Ultralites on and a couple of ghillie on me and a vest. To give you an idea, look at his picture
Sniper Tech like I said maybe even not use the mesh for the hood and just apply and tie ghillie to the mask.
Does anyone have any other ideas?, thanks!
Mx_Wolf86 hasn't added any friends yet.