- Active Posts:
- 225 (0.09 per day)
- Most Active In:
- Mechanical Markers (77 posts)
- 15-October 06
- Profile Views:
- Last Active:
- Apr 19 2013 09:03 AM
- Member Title:
- Forum Member
- Age Unknown
- Birthday Unknown
- Not Telling
Topics I've Started
21 June 2012 - 03:59 PMhey guys i have an classic automag with a z-grip and some accessories im thinking about selling off, i have a rough idea what its worth but i have been out of the sport for a while and i want to make sure of what i got.
ok so here is the total breakdown.
classic automag with a powerfeed mainbody
classic air valve with an ANS phase 2 bolt
a medium and a large deadon drop foward
a blue 10" cp barrel .689
and an older chrome cp barrel (the chrome on the inside is mostly flaked off basically making the barrel worthless but i figured i would mention it anyway)
i also have a 20 oz co2 tank and a pure energy 48/3000 tank with a year left on it.( i might be hanging on to them though)
thanks for reading
09 December 2009 - 03:46 PMhey i just picked up an classic mag with a cp barrel for $87. i was wondering it it would hurt a whole lot to take a fine grit sand paper and polish up the body a little bit. i have heard that it could mess with the sear but i don't think such a small difference in O.D. could make that big of a deal. my main concern is the possibility of the body rusting, i don't know if its made of steel or stainless steel.
30 July 2008 - 12:31 PMalright so i should be getting a post 2K half block cocker. my goal is to keep the gun as color matched as posible with the exception of the barrel, also i want this gun to be fast weather i go mech or eloctro. Fisrt im going to start off with of a list of what i have then some questons on whats to get next. I will post pics as i go
What i should be getting:
green 2k halfblocked cocker body
internals (has a slotted hammer)
green flame drop
green kapp cocking rod
chrome black magic reg.
free flow RAM /w QEV
so I should be needing the following things: please let me know if i leave anything out (pm me if you have anything i need below that you would like to sell)
front block (green),
3-way ( if i go mech)
barrel (two piece, orange front and white back .685 ish)
now for the questions:
the biggest decision on this project for me is should i go electro or mech?
if i go electro i would like to get a E-blade w/ a fireball MT. wave trigger, or at least the samuri trigger. my only complaint with that is it really wont color match the rest of the gun.
If i go mech i want to know frame, pneumatics, and any others parts to buy in order to get the lightest trigger pull possible while keeping the chance of short-stroking to a minimum. i already have a mech automag that i have that problem with.
the next question i have is what is a slotted hammer? what are the pro/cons? basicly fill me in on it because i have never heard of it before.
28 February 2008 - 07:53 AMalright i have succesfully built and broke my air canon. the only things that are salvageable are the barrel, sprinkler valve and electronics. so instead of building another air chamber I was thinking about making it run off of 12 grams instead. the only problem is that i dont know how to do it and more importantly how to do it safley. if anybody could help me out it would be appreciated.
27 November 2007 - 10:43 AMif you have made any deals with me please comment here.
hellrazor2290 hasn't added any friends yet.