Reputation: 0 Neutral
- Active Posts:
- 43 (0.01 per day)
- Most Active In:
- Sniper HQ (27 posts)
- 24-January 06
- Profile Views:
- Last Active:
- Jan 15 2010 05:48 PM
- Member Title:
- Forum Newbie
- 24 years old
- June 13, 1989
- Not Telling
- Gainesville, FL
- Mudding(atv), golf, paintball, snowboarding, hunting
- Brigade Name:
Posts I've Made
10 January 2010 - 01:01 PMI installed the Longbow kit onto my Ion and once I turn the saftey off and fire the light shuts off and the gun doesnt fire. Any Ideas?..
And yes I have air and paint in the gun
List of things to do in this order:
1. Check Batteries
2. Check Board
3. Check Regulator
4. Check Bolt
5. Go to nearest Smart Parts Dealer for help
Fresh batteries...when air is in gun i open it and remove trigger assembly and when i pull back the whole trigger assembly the air goes....what could it be
26 December 2009 - 11:20 PMSTOP PRESS: I have been able to add one QBow adaptor to the shopping cart, then if trying to add another I get the out of stock message, I've released it from my cart so I recommend if you want one you follow the link below or call the shop soon!
You cannot directly fit a QLoader to the Longbow receiver, you need the QBow adaptor which is in the top left of the picture of the QBow adaptor kit.
Then you realy want the QBow mount in the bottom left of the picture of the QBow adaptor kit. You could easily make a mount as it is a block of metal, or just use the QLoaders own round fitting on the regulator.
It will be possible to manufacture your own QBow adaptor to fit into the Longbow receiver.
QBow mounted onto a Deadlywind bodykit:
QLoader on Deadlywind body with the standard fittings. Note how high the feed gets.
Note that mine is on a different body kit so I had to make some modifications.
Nope no longer carring it due to a company going out of business...which is some bull....thanks to spec ops they are screwing ppl