Turpentine on plastic?
Posted 01 October 2006 - 10:40 AM
I recently did a paintjob on my Proto switch EL mask, but now, with winter coming, I want to change my design and colour. For those of you that don't know about my paintjobs, link here .
I was wondering if using turpentine to remove the paint on my mask would damage plastic. If so, what other option would I have to remove the paint?
Posted 01 October 2006 - 02:38 PM
You can either use a Paint Brush or a Rag and apply the JASCO on the Marker's Body, you'll know right away that the Paint Remover is working once it comes into contact wit the Paint.
Posted 01 October 2006 - 04:51 PM
#5 Guest_Dream of Nullification_*
Posted 02 October 2006 - 10:46 AM
nexttime i would suggest putting masking tape down on your mask then painting over that. then you can interchange it out as needed by just removing the tape
edit: the wire brush will leave scrach marks over your mask though it will also have a better holding surface if you repaint
if you dont want the scrach marks you can try a pot scrubber, should have one around or under your sink
This post has been edited by Dream of Nullification: 02 October 2006 - 10:59 AM
Posted 02 October 2006 - 11:23 AM
Posted 02 October 2006 - 10:01 PM
To remove paint from plastic, get a can of oven cleaner.
Put the item you want to remove the paint form in a container big enough, and cover it with the oven cleaner.
That should work.
More info here: