i know i have, and its turned my paintball machine into a mere toy.
(lock up: when the cyclone feed seems to not have enough pressure to move itself, therefore making you use the cylinder reset rod on the side of your a-5.)
the reason for lock up is the stock rachet (schematic description 20) in the cyclone feed is made of
rubber, (wth) and it bends under the air pressure turning your a-5 into a very cool paperweight.
but ive found the answer!
its the Vortex mod for the cyclone feed by Tech T!
it replaces that evil rubber rachet with a nice anodized aluminum rachet, and it replaces the plastic feeder axle with an aluminum axle,
and you never have to worry about lockup again.
ps: this is a definite must have mod
pps: while this mod is great, it is the most frustrating thing ive ever had to install, because it comes with no instructions, it took me 3 hours to get it to fit, so if you dont have time or you dont know the inside of your a-5 like the back of your hand, have your local paintball shop clerk,owner, mechanic, whatever install this mod for you
This post has been edited by SteelRain8686: 17 August 2006 - 11:03 AM