[Kheph]

NeoGzus, on Jul 16 2007, 07:08 PM, said:

Here's mine in action, painted some camo flames on the helmet. Told her not to use the digital zoom, it looks ugly. Attached some knee pads to my LBV and painted the ghost recon logo on it

what kind of mask is this??

[ger]

^ Neo's mask is a Profiler

So is mine. Although it isn't a complete Hellspawn mod - it's the way I like it. I left off the Modge Podge step: #1 I didn't like the way it affected the colors #2 I didn't feel like it !

What I did do was paint the hard portions w/ a Rustoleum tan color (couldn't find the right color in Krylon), then tape them off. I then painted the flex rubber portions w/ Krylon Fusion OD. Then I taped off additional portions of the mask I didn't want the mat'l on - sprayed the mask & mat'l w/ the spraymount & mounted, then used super glue on the edges. Afterwards I sprayed the mat'l w/ waterproofing treatment, this allows me to wipe any paint right off (it works so far). I'll say this though, the waterproofing spray released almost all the spraymount underneath. I think if I were to do it again I'd treat the mat'l first then try to spraymount it. Anyways, the super glue holds it tight.

I love how it turned out & that's what's important.

Attached File(s)

•  Mask_Update.JPG (96.01K)
  Number of downloads: 52

This post has been edited by ger: 31 August 2008 - 01:15 AM

[wingedspawn]

well I've had these done for a while but I finally got the time to put them on here. I've already played a few games with them so they won't look as good as they did when my brother and I first finished them. I think they look pretty good for our first time. we used the J flex series mask. I just used a sharpie for the black around the lenses.

Attached File(s)

•  _1.jpg (75.46K)
  Number of downloads: 19
•  _1_2.jpg (84.07K)
  Number of downloads: 26
•  _1_3.jpg (86.46K)
  Number of downloads: 18

This post has been edited by wingedspawn: 26 January 2009 - 02:48 PM

[TeleFragger]

Elongation, on Aug 18 2007, 07:53 AM, said:

Here is my Dye i3 with Flecktarn camo modded according to Hellspawns directions and others in this thread. Its a helluva mask to mod with many small holes and angles but the end result was worth it in my opinion. Used a t-shirt and the extra flexibility in the material was welcome when stretching the fabric in the glueing phase.

P1140289.JPG
P1140290.JPG
P1140293.JPG
P1140295_copy.jpg

10 pages in!!!! and finally another dye i3!!!!! I wanted to see if anyone else did it before i thought about it..

is it still holding up ok????

t-shirt huh... hmmmmm