98 Sniper Removing front grip and yada yada yada...
Posted 07 March 2006 - 05:28 PM
Posted 08 March 2006 - 12:53 PM
yes sir. thats correct.
So right now, there is a hole in the bottom. What is the cheapest way I could fill it, on 2 conditions. 1. I styill need tobe able to take my marker apart, and 2. I still need to be able to tap into w/e I fill it with.
This post has been edited by Gunslinger7: 08 March 2006 - 12:56 PM
Posted 10 March 2006 - 10:57 AM
it was messy but ive got to grind it down and make it nice and smooth.
i want to add a hand guard like an A5-A2.
where can i get one for my 98custom???
otherwise im just going to have to leave it with tape covering the hole, which is lame!!!
Posted 10 March 2006 - 07:34 PM
yo sweet gun man you all made me think that i want to get rid of my fore grip but in the pic obuve (pard my spelling)but where can i get a horisontal grip for my 98c?
yo gun slinger i wanna see the finnishing tuch on that baybe and if you will give me a walk thru on how to do it
Posted 10 March 2006 - 07:51 PM
It is rather simple.
I still do not know if there is enough metal to hold the screws. I don't know if I will be able to tap this... What do you all think?
PM me for steps Mop.
Posted 11 March 2006 - 07:37 PM
Thanks evil. Hey you did this to your 98 right? Did you fill the hole in afterwards?
Posted 11 March 2006 - 07:50 PM
When i see you your in my cross hairs,but when you see me your looking over your sholder still wondering why that tree is waving at you. "Explosives slove everthing"-Sandy WBC I'm going for a Sunday drive Navy Seal Style
Posted 13 March 2006 - 03:28 PM
Here are the pics
^ as you can see the hole in the 98c is right where the bolt fastens the rail tightly to its component. (This is right next to where it is on the marker to show the problem I'm having.)
Please list solutions for this ASAP. Thanks!
Posted 13 March 2006 - 04:31 PM
Okay. So, light a candle. take some of the melted wax and rub it on the inside of one reciever half. Actually, forget wax, use like. . . vaseline, or any kind of lube or oil or whatever. Then, use a putty (is J&B Weld a putty?) that bonds with metal and put it all over both reciaver halfs in the vicinity of the hole ( rubbing lube inside the hole with your finger. OMFG). Let it dry or whatever it does. Then the reciever half with the lube should come off, and the other half will have a block that fits perfectly and can be tapped.
This post has been edited by questionful: 14 March 2006 - 11:56 AM