Custom paint job?
Posted 11 November 2012 - 04:51 PM
Posted 11 November 2012 - 05:49 PM
Doorbells? Seriously? That's the swear filter? . -Pirate
"Authenticity bro, everyone voids their bowels when they die."
-Guy at end of paintball movie
Posted 12 November 2012 - 01:25 PM
Wash the parts with a high quality dish soap and rinse thoroughly.
Sand with a fine grit paper. Wipe it down with a clean damp rag and let it dry.
Prime the parts. Let it dry according to the instructions. White primer might make the colors a bit lighter, black primer a bit darker.
As for putting on the woodland camo.... That depends on what style and colors you're going to use and how detailed you want to make it. Woodland comes in 3 or 4 color versions, and actual colors can vary. 3 color is normally brown green and a bit of black, 4 color has either two brown, 1 green and black OR 2 green, 1 brown and black.
Pick either green or brown as your main color and paint it first. Black is generally an accent color so it would go on last. Use painters tape to get nice clean edges between the colors. A light sanding between coats helps, be sure to wipe it down after sanding.
Two to three coats of clear coat should do it.
What kind of paint to use? Depends on your budget. Krylon Fusion has a few shades of green and brown and is fairly cheap. If you have a bit more money to spend check out http://www.houtsente...ndprestige.html
That is not dead which can eternal lie,And with strange aeons even death may die.
Posted 12 November 2012 - 04:50 PM
Grammar Police Co-Commander Badge #1 IKE & Ike '09 STUDMUFFIN Debater of the 1st Order of Ashrak ASH123
"Overkill is underrated." -Col. John "Hannibal" Smith
... another Staff granted wish.
Posted 02 December 2012 - 04:56 PM
Comes in tons of camo colors and fairly easy to apply. Even if you don't access to a compressor.
Here's a review on a real Firearm.
You can also find it forsale on ebay. (shake n spray)
Posted 03 December 2012 - 12:00 PM