Help
For those of you who dont know, The Tippmann US Army Carver one can not be modded with a cyclone feed system. The reason for this is because the Carver ones do not use the same removable feedneck as the 98s or A5s. Unlike 98s and A5s, The Carver one uses a removable feedneck that uses a screw to mount to the marker. My idea which I hope players will support this is for a company to come out with a adapter kit which will allow The Carver one to be modded with the Tippmann Cyclone feed system. This kit would consist of a mounting adapter that would screw on the marker as if it were the feedneck which would give the marker the propper mounts to except the cyclone feed system. The kit would also contain any parts needed for the cyclone system to operate propperly. I would like to get some feed back on this and read what you have to say. Thanks for reading.
Page 1 of 1
Carver one cyclone feed mounting adapter idea!
Rate Topic:
#2
oldhunter 
- Forum Member
-
- Group: Members
- Posts: 170
- Joined: 03-October 10
- Gender:Male
- Location:bottom end of kansas
- Brigade Name:smoke guarde
Posted 17 February 2012 - 03:42 PM
Welcome to the forms Fiddle008.
It would be intersting to see that done. Sadly I dont have a Carver our the Cyclone to come up with an idea as to how it would work. Can you post a pic of the Carver feedneck area?
It would be intersting to see that done. Sadly I dont have a Carver our the Cyclone to come up with an idea as to how it would work. Can you post a pic of the Carver feedneck area?
repugno nex est morior inritus
#3
Fiddle008
- Forum Newbie
-
- Group: Members
- Posts: 2
- Joined: 16-February 12
- Gender:Male
- Location:N.California
- Brigade Name:LYCAN008
Posted 17 February 2012 - 05:29 PM
Here are the pictures you asked for. As you can see the feedneck is much different from the 98/A5 feednecks. On this feedneck there is a nut that threads on a screw that keeps the feedneck tight to the marker.
Attached File(s)
-
IMG_1830.JPG (1.7MB)
Number of downloads: 5 -
IMG_1831.JPG (1.66MB)
Number of downloads: 5 -
IMG_1829.JPG (1.47MB)
Number of downloads: 1 -
IMG_1828.JPG (1.54MB)
Number of downloads: 1
#4
crackpotcraig
- Forum Newbie
-
- Group: Members
- Posts: 5
- Joined: 20-December 11
- Brigade Name:crackpotcraig
Posted 24 February 2012 - 05:34 PM
Check out my "droped cyclone options" thread. You can pretty mutch put the cyclone any where and feed to any thing.
If you can still tap into the powertube for air to power the cyclone, you should be able to make your own tubing system to feed into the neck (without moding the stock feed neck. I made my tubing from 10 ball tubes, and garden erigation hose.
Of corse tippman will probibly have a cyclone adaptor kit for you soon.
Good luck.
If you can still tap into the powertube for air to power the cyclone, you should be able to make your own tubing system to feed into the neck (without moding the stock feed neck. I made my tubing from 10 ball tubes, and garden erigation hose.
Of corse tippman will probibly have a cyclone adaptor kit for you soon.
Good luck.
This post has been edited by crackpotcraig: 24 February 2012 - 05:34 PM
Share this topic:
Page 1 of 1