Help
Considering all of the mods available for your Tippy's and B4's, what would be cool would be a universal drop in Milsim shroud for a majority of electro markers.
Something that has a body with offset or side mounted picatinny rails, a stock attachment point/integrated stock and a folding and/or clip in top section with space for the feedneck. All this could be fastened with screw-in soft clamps to ensure the marker doesn't get damaged or move around........
Just a thought, but this would be cool : )
Page 1 of 1
- You cannot start a new topic
-
This topic is locked
Electro Shroud Milsim shroud for any electro marker
#1
Steiner007 
- Forum Newbie
-
- Group: Members
- Posts: 20
- Joined: 22-March 11
- Gender:Male
- Location:Sydney, Australia
Posted 15 June 2011 - 04:56 PM
#2
Cuy'val Dar
- 327 G.I.R. Bastogne Bulldogs
-
- Group: Members
- Posts: 752
- Joined: 31-May 09
- Gender:Male
- Location:Ponchatoula Louisiana
- Brigade Name:MICHAEL J. CABOOSE
Posted 15 June 2011 - 08:08 PM
While the concept is good (and something I would buy) it would be tough to do because of all of the different shapes of various electro guns
Doorbells? Seriously? That's the swear filter? . -Pirate
"Authenticity bro, everyone voids their bowels when they die."
-Guy at end of paintball movie
#3
ger
- Shine
-
- Group: Members
- Posts: 1,675
- Joined: 31-August 06
- Gender:Male
- Location:Western PA
Posted 17 June 2011 - 08:54 AM
Cuy'val Dar, on 15 June 2011 - 11:08 PM, said:
it would be tough to do because of all of the different shapes of various electro guns
Agreed. There are way too many differences in all the markers to have a "universal" shroud.
Sure, something like that would likely sell pretty well but it's not practical. There are however all kinds of airsoft shell mods that players have done.
ger
You bought the brand, not my allegiance.
You bought the brand, not my allegiance.
#4
Eagle Eye
- I am Become Death, Squeegier of Worlds.
-
- Group: Members
- Posts: 239
- Joined: 16-November 04
- Gender:Male
- Location:J-Bad, Afghanistan (for now)
- Brigade Name:BattleSpam
Posted 17 June 2011 - 11:45 AM
sounds like the BlackCell project SO had for the ION awhile back. With all the peripherals they made for it, different base bodies (for Ion, Mini, AXE, ect) would expand the range a bit, since the stocks and extras would be all universal fit for the base bodies
The Paintball Sniper has already done the first step: convince you they don't exist.
Allied Superior Meritorious Service Medal recipient: D-Day 2008
"There is no "fixing" a Tippmann ... if it didn't work, there is only one reason .... you tried to clean it. Any problem a Tippmann has can be easily fixed by adding more dirt, preferably to the internals, followed by 3 drops of oil." -- Acara
#5
Steiner007
- Forum Newbie
-
- Group: Members
- Posts: 20
- Joined: 22-March 11
- Gender:Male
- Location:Sydney, Australia
Posted 21 June 2011 - 04:39 PM
Would it work with a basic shell that has a composite memory foam on the inside? That would take care of the shock absorbtion factor as well as minimal pressure placed upon the marker.
The only thing I've seen that is remotely close is a Ruger Mini 14 shell, but those are illegal here in Oz....stupid firearms laws.........
The only thing I've seen that is remotely close is a Ruger Mini 14 shell, but those are illegal here in Oz....stupid firearms laws.........
Share this topic:
Page 1 of 1
- You cannot start a new topic
-
This topic is locked