[Down Range Pain]

i have an idea for a better Neft Vortex launcher...yeah i know, here we go again but its driving me crazy. so im going to get my ideas down and upload pics later if i draw them (which i probably will)



NAME: i call it a TAS 'EM launcher for lack of a better name...from the purpose of the vortex rounds

Tank
And
Structure
Munitions

i was thinking of a launcher that is muzzel loading, just to keep things simple.

i hate the way you have to buy four different things to use the RAP4 style munitions (charger adapters etc)
but i dont want to work a whole poppit or spoolie valve system, bolt and all that. think it'd be simplier for it to work on the same concept as a spud gun, fill the barrel air tight, hit it from behind with a massive amount of expanding gases and pressure. so the barrel will have to be made with an inner diameter smaller then a vortex's outer diameter,not by tht much just enough to compress it slightly, so as to form a seal as it trys to expand.

then id have a chamber behind it, leading directly to the ASA, seperated from the barrel by a pnuematic or electric, or some automatic valve, triggered to open for maybe from 0.45 all the way to a whole second when the trigger is pulled, whatever is needed. so a basic electrical system would be required, but it beats designing a new bolt and having a huge valve system.


please tell me what you all think of the concept

This post has been edited by Down Range Pain: 05 March 2011 - 07:49 AM

[MeDiC434]

Sounds like a Havoc under barrel unit unit with breech load

[Down Range Pain]

i always wondered, it u have a breech load kit on an under mount launcher, how do you open it up if the top of it is attached to something

[MeDiC434]

The breech load for the havoc can be set to open from any side. You have 360 degrees of possibilities! There is a set screw that allows you to adjust it.

[Down Range Pain]

well tht is just awesome.