So of course i'm searching away, Flasc paintball barrels with a 0.679 back.. plus a extension, plus the apex.. yea 100$
Smart parts freak back... insert.. plus front. plus apex tip on my own, yea theres an easy 120$
lurker eingenbarrel is 40$ and the right bore, but no apex tip.
Would it be possible to create a barrel which simply does it all?
I say How about creating a one piece barrel, preferably which is around 12" to 14"
-> Freak bored barrel.
-> Apex Ready Tip/ C-series Tip. ( just do two tips to keep the cost down)
-> 9" no ported length
-> you know those little groves in the phantom barrels by the porting, those little channels. Yea put those in for the last 2 to 4" of porting on the barrel they work wonders.
-> NO rifling, to many variables with different paint sizes, smooth micro polished barrel.
-> Barrel Diameter of 0.685 Instead of the regular 0.700 ( account for small ass paint again,)
-> O-ring spot past the threading to help secure barrel.
Done. Plenty of players have freak systems, so barrel plus an insert of choice will be cheep, if they want the apex then its up to them to get em.
Carry the inserts and apex in the store for choices through spec ops.
If smart parts will sue you for freak boring then create your own aluminum inserts at whatever length wont get you sued. instead of calling it aluminum ( which might get you sued for using the same metal as them. ) Then use brass, or iron, or Carbon fiber. or Al +3 instead of Al+2.
This post has been edited by Eskimo: 25 January 2011 - 05:27 PM