[junk]

Ok so the expansion chamber, can I get an adapter and run macro line straight from that into the spec ops combat combat stock, or do I need to add a reg somewhere in there? and no, i am not using CO2. just wondering if that was a possibillity.

pic below or attached idk, but its somehwere

Attached File(s)

•  mr2.jpg (42.02K)
  Number of downloads: 13

[ger]

What expansion chamber? Is that an Air-thru stock or are you modding it?

With the proper macroline fittings, yes, you can run the line from the vertical ASA (what your Qloader is attached to) directly to the stock.

[junk]

ger, on May 28 2010, 10:47 AM, said:

What expansion chamber? Is that an Air-thru stock or are you modding it?

With the proper macroline fittings, yes, you can run the line from the vertical ASA (what your Qloader is attached to) directly to the stock.

The stock has an opening which looks like it was made for running macroline through, but it looks like I'd have to drill in the butt of the gun (not the plate but right below it) in order to put the quick disconect on. thanks for the correction on the ASA. I'm confused though, would I run the fitting from the bottom of the ASA or would I unscrew that and find the male/female part to connect direct to the marker body? Third, is there a post somewhere on how to properly attach and fit macroline so I don't screw myself over?

Thanks

[coveringfire]

You run it just from the bottom of the vert asa. Techpb has a good video on youtube explaining how to do it. Just search macroline its the first one. Also remember when buying the fittings for he mr2 that spyers use metric fittings so fittings used on other paintball guns wont fit the threads of the vert asa. But it doesnt matter what quick disconnect u get because it will be attached to the macro line and i think youd be glueing it in place.

[junk]

Thanks a bunch