Special Ops Paintball: Is Your Dye NT having issues? Look here for the solutions - Special Ops Paintball

Jump to content


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

Is Your Dye NT having issues? Look here for the solutions

#1 User is offline   slinkyaroo 

  • Gravity takes over where brains leave off.
  • PipPipPipPipPipPipPip
  • Group: Administrators
  • Posts: 7,844
  • Joined: 08-February 06
  • Gender:Male
  • Location:Belleville, Ont Canada

Posted 20 March 2010 - 06:17 AM

Good info from Dyematrix.com

"TROPICALPUMKIN" said:

make sure you these updated parts first
eye pipe(notice the dusted rear section)
Posted Image
Notched FRONT spool bumper
Posted Image
copper spool spring
Posted Image
updated asa
Posted Image
VrelicV's picture

If you still have issues then check your paint's bore size. If your using extremely small bored paint then you may need a new updated small bored paint-pic
Posted Image
noticed two dusted rings on rear section, this indicates that you have the newest small bored paint eye pipe

Contact dye for one of these either by calling
(858) 536-5183


set reg to 130 psi(aprox. 300fps with no spacers)
use blue flow insert
dwell 6-8
hope this helps



.
0

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users