Special Ops Paintball: upgradin my vs1 - Special Ops Paintball

Jump to content


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

upgradin my vs1 Rate Topic: -----

#1 User is offline   theiceman 

  • Forum Newbie
  • Pip
  • Group: Members
  • Posts: 2
  • Joined: 21-September 09
  • Brigade Name:xenon

Posted 21 September 2009 - 06:12 AM

ok so all the other forums on line are slow and dont let me post for no apparent reason so im ask on here and maybe get some help:) ok i run a vs1, sp no rise clamping feedneck, 14'' all american, and a i believe 48/45 tank but its filled with nitrogen:S i have an invert halo too hopper also......ok so my problem...first. i was playing a speedball onevsone just drilling and id walk for about 3 secinds and it wouldnt recock.....so id pull her back and keep going, then the same thing would happen....so idk what the problem is...other forums are sayin thats its bc of co2 but it did it to me with nitrogen and hpa too....i was thinking maybe i need a new regulator possibly...either a palmer stab or a detonator....also the front block and/ior 'volumizer' bit at the front...is it possible to buy just those? i saw one i think it was called the assualt blck or something and i liked it and was wondering if it would fit my gun....thanks fer yer help:)
0

#2 User is offline   SFC. Connell 

  • *Extreme Strategist*
  • PipPipPipPipPip
  • Group: Members
  • Posts: 1,433
  • Joined: 23-April 07
  • Gender:Male
  • Location:Mass
  • Brigade Name:SFC. Connell

Posted 21 September 2009 - 06:20 AM

take it apart clean EVERYTHING and lube it back up. Then test fire it again. Spyders can be pains in the butt when it gets the slightest bit dirty. If that isnt it, maybe you need a new spring? I'm not too great at troubleshooting guns but 99% of the time your gun just needs to be cleaned and lubed.
Feedback

She faked a funeral so people would come visit?
ROFLMAO That's both terrible and hilarious at the same time.-Pirate
0

#3 User is offline   headhunter2 

  • Sophomore Member
  • PipPipPip
  • Group: Members
  • Posts: 567
  • Joined: 07-December 05
  • Brigade Name:headhunter2

Posted 21 September 2009 - 08:13 AM

Well like stated above take the marker apart and clean and lube everything. Check all the o rings for wear or cracks. Lube the marker and reassemble all the parts. If the problem continues then you have a pressure issue. I know you stated that you are using HPA so I would suggest replacing the expansion chamber/volumizer that came stock with a high pressure regulator.


One recommendation that I will make to you is get another marker. Spyders are ok markers but there are so many more that are better. Save up a little bit of money are buy a used marker. Something like an old DM or PM. They will not be too expensive and will preform so much better than any spyder ever could. Just my .02
Invisible text club member #15 Every time you wipe paint God makes a new PETA member Adminion #12 My Feedback
If you play your own game of paintball using Spec ops as guidelines and not as "law of position", put this in your sig.
0

#4 User is offline   theiceman 

  • Forum Newbie
  • Pip
  • Group: Members
  • Posts: 2
  • Joined: 21-September 09
  • Brigade Name:xenon

Posted 25 September 2009 - 06:04 AM

i completely and thorughly cleaned er, still problems, im most likely buying an upped ion on the 4th from a budd, but i want this as a backup marker, i just feel comfortable to me, and im gonna get a new front block and reg next week too, thanks for yer help
0

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users