[Chupathingy009]

So a friend of mine offered this package to me, and I would like to build a pump from the CCM 86* frame and pump kit, and then a semi from the hinge frame and the pneumatics. I see that I definitely need a second body, barrel, reg, and asa, but what else does it look like i need? i'd really like to put this together in to two guns soon so please help if you can, thanks!

And sorry, tinypic is blocked on the computer i'm on so i had to attach the pic instead of uploading it into the post.

Attached File(s)

•  P1000725.JPG (61.35K)
  Number of downloads: 26

This post has been edited by Chupathingy009: 25 August 2009 - 10:02 AM

[flyweightnate]

You'll need a pair of lower tube kits, one for each body, unless I'm missing a hammer and valve inside the body. At that point, you can make your pump marker.

For a second, semiauto cocker, you'll need a body, a bolt, backblock, LPR (included is a trilogy LPR, won't fit, as far as I can see...), another reg and ASA, cocking rod, and I'd highly recommend a barrel kit or smallbore barrel for each gun.