[Freakshow]

Here are some pics of my WAS grip. I am having problems with it running away into auto no matter if its in auto or burst. Thought I would post to see if anyone noticed anything out of place.

 grip_1.jpg (6.52K)
Number of downloads: 1
 grip_2.jpg (1.08MB)
Number of downloads: 0
 grip_3.jpg (6.85K)
Number of downloads: 0
 grip_4.jpg (5.23K)
Number of downloads: 0
 trigger_1.jpg (5.04K)
Number of downloads: 0
 trigger_2.jpg (5.91K)
Number of downloads: 0
 trigger_3.jpg (6.42K)
Number of downloads: 0
 trigger_4.jpg (5.23K)
Number of downloads: 0
 trigger_5.jpg (5K)
Number of downloads: 0

Let me know if anything looks amiss.

[Malu]

I'm don't know much, but the guys at A5OG do. And here's a thread with a guy that has your same problem. Link

[headhunter2]

I had this same issue with my WAS board. It was brand new out of the box. Put it on the marker and pulled the trigger and the damn thing went full auto and would not stop firing until I turned the board off. I sent my to tippmann and they said the board was damaged and that it was a factory defect. Might wanna do the same with yours.

[kage83]

you need the different sear. the e trigger sear just pivots...your's looks like the mechanical sear. you can see the parts side by side here.

i don't know if this'll fix the situation...but i know that's a mechanical sear and you need the e grip sear. if it doesn't work look through the a5og link that Malu gave...they got a lot of other options with playing with the debounce and other settings.

This post has been edited by kage83: 21 August 2009 - 08:06 PM