[Renquist]

I put a T board in a Piranha Evo for giggles. Put a Detonator reg on it and nothing else too important but am having an odd issue.

The board is capped at 30 BPS which of course is just silly. My bud amped it up and the marker would only fire every second shot basically and had all kinds of issues. I reset it to factory and it worked fine.

This morning I amped it to 20 and threw some air on it, no paint.

When rapid firing (semi, rt, burst or auto) it will let out maybe 4 shots and then the marker does not recock and air leaks out the barrel. O ring issue?

The air was pretty low but figured I'd ask as I won't be getting it refilled in a hurry.

Thanks.

[Renquist]

No one?

[slinkyaroo]

If you're low on air then that's probably why it's not recocking consistantly. If you have enough air and it still does it then usually you replace the o-ring on the hammer before you do anything else.

Air leaking out of the barrel is a valve issue. Does it leak when cocked?


.

[Renquist]

Nope. I haven't gotten some air to see if that resolves the issue. It worked fine before I upped the ROF to 20 but again, I'll have to test the air.