I found an offer for a PMI Piranha Evo and the board doesn't work. I can't find any information about it, so here is my newb question:
What would the technical name for the electronics in the gun and where would I find it?
(If this is the wrong place, Mods, please move it. I wasn't sure about the placement.)
Page 1 of 1
PMI Piranha The board doesn't seem to be working....
#1
Posted 12 May 2009 - 06:37 PM
Christian 'Baller
If you are under 16 and pay for your own gear, put this in your signature.
Furtim, Patientia, Veneratio
If you are under 16 and pay for your own gear, put this in your signature.
Furtim, Patientia, Veneratio
#2
Posted 12 May 2009 - 07:00 PM
It beens a few years for me. All I remember is sometimes it won't turn on because of some silly button not pressed.
anyways... the manual for the 05 Evo: http://www.forum.paintballlibrary.com/view...f=168&t=166
.
anyways... the manual for the 05 Evo: http://www.forum.paintballlibrary.com/view...f=168&t=166
.
#3
Posted 12 May 2009 - 07:01 PM
Hm, thanks. That would be sweet if I got it for $40 because some button isn't pressed.
Christian 'Baller
If you are under 16 and pay for your own gear, put this in your signature.
Furtim, Patientia, Veneratio
If you are under 16 and pay for your own gear, put this in your signature.
Furtim, Patientia, Veneratio
#4
Posted 12 May 2009 - 07:06 PM
Semi only - low pressure marker. Scenerio Dreams made a board for it. However I don't think I'd put the money into it.
.
.
#5
Posted 13 May 2009 - 11:37 AM
I picked on up the other day and it's not bad for the money I paid. The board apparently doesn't like to read every trigger pull and as you've noticed, the trigger is pretty rough. BPP makes a boss blade trigger but I don't know if I want to put cash into it. They also have a Tadao grip I believe for $75, if you want to spend some cash then it would rip with that in. At $40 you can't go wrong (what I paid as well!).
Share this topic:
Page 1 of 1

Help
















