Help
How would I go about painting this particular marker? Would you recommend leaving rails black? Do I have to block any part of regulator with painter's tape?
Page 1 of 1
Painting My SP1
just a couple tips
Rate Topic:
#2
Capt.turkey 
- Forum Newbie
-
- Group: Members
- Posts: 11
- Joined: 23-April 09
- Brigade Name:capt.turkey
Posted 23 April 2009 - 11:44 AM
Match99, on Apr 23 2009, 12:00 AM, said:
How would I go about painting this particular marker? Would you recommend leaving rails black? Do I have to block any part of regulator with painter's tape?
For the rails depends what you want i left mine black and only the venting thing on the bottem should be covered. then just cover the other parts that paint can get into and paintaway
If you are 18 or older and pay for your own gear put this on your sig!!!!
#3
Newdles
- Forum Newbie
-
- Group: Members
- Posts: 1
- Joined: 23-April 09
- Brigade Name:Nuedles
Posted 23 April 2009 - 12:29 PM
I would tape off all of the moving parts (i.e.: bolt, hoses (yes it moves), and inside the barrel/bolt) and use a very thin coat of texture paint. Texture paint is mostly used to paint statues or faux rocks. You can find it at Lowes or Home Depo for pretty cheap. I used a light tan statue texture paint on my 98C and it looks really good. It only took me about an hour to paint and dry it hanging (important). I get compliments on it and people swear they don't see it in broad day light. 
Good luck in making your SP1 look sick.
Good luck in making your SP1 look sick.
#4 Guest_Biarmaren_*
Posted 27 August 2009 - 07:54 AM
I have one in the car right now, I will try to re-member to pull it out and measure it tomorrow.
I don't think they used more than a can of spray for the 3-4 walls they made, though they were just painting the stone 'lines'
Dan-O
I don't think they used more than a can of spray for the 3-4 walls they made, though they were just painting the stone 'lines'
Dan-O
Share this topic:
Page 1 of 1