MacDev II Yes...another one is coming!
Posted 16 November 2008 - 11:27 PM
Posted 17 November 2008 - 09:24 AM
Last year you did not see Droids fall below $800 until about the July mark. That is $250 Below map. They are still selling strong $700-800.
So using a little logic I forsee the used RX market to stay in the $1k range for at least 4 months. Then I do not expect to see them fall below $800 for the rest of '09.
Posted 17 November 2008 - 10:51 PM
try all of them, before
i was at first and now im starting to be disappointing
Posted 20 November 2008 - 08:13 AM
Posted 20 November 2008 - 08:51 AM
Yeah, but its expensive as hell, and micro brews don't really exist due to strict governmental control.
Posted 20 November 2008 - 10:23 AM
Posted 26 November 2008 - 03:13 PM
9 out of 10 teens listen to rap. if you're one of the ones that stays true to proggressive metal/classic rock,put this in your sig.
My favorite mode on a smart parts gun is OFF!!
Save a rock throw an ion.
Posted 29 November 2008 - 12:11 PM
I love the way my Borg shoots, but I like the way my PM8 feels a LOT more. I can't move the LPR on the Borg or make it single tube... but maybe I can UL it? The connectors on the noids look identical so I think the stock UL frame would work with the Borg noid, especially considering both operate at about the same LPR pressure. Only thing is getting eyes for it, but the Borg eyes might work or if not, I bet DM eyes would...
EDIT: Well the Borg 'noid was clicking fine (have no air to see if it would have really fired) while attached to the UL frame's board, although I couldn't attach the eyes to the board... and obviously, the Borg's hulk of a solenoid wouldn't fit in the PM8's UL frame. The frame screw holes line up almost exactly though, so besides getting the Borg noid to somehow fit in the UL frame, it seems it would actually be fairly easy to UL a Borg. It would probably be even easier on an 07 with its slimmer solenoid.
This post has been edited by Z3R0: 29 November 2008 - 01:16 PM
Lapco Grey Ghost 2008, Classic Automag, PM8, 06 Cyborg
Posted 04 December 2008 - 12:36 AM