A-5 E-Grip Review/Rant/Story?
Posted 13 September 2008 - 07:18 PM
I got myself an E-Grip cause I needed to shoot faster (I only played on a Speedball field at the time)
It sounded good, and the dude at the store installed it for me.
So I got the gun back and was excited because I turned it on and messed with it. Heard the solenoid punching. Everything worked fine without air.
Then I go to my field and I'm showing off and all, but then I go to play.
I set the gun to DeBounce mode to keep up with the spaceguns that the other kids were using.
I go to shoot, and after three shots, it won't stop shooting.
The refs are going crazy- I'm trying to turn it off- And it just keeps on going.
The whole thing was really stupid and made me look like an butt. It finally ceased, and I was not allowed to get back on the field and play unless I fixed it.
I messed with it in the Chrono but couldn't fix it. I finally determined that it would only worked correctly on single fire, so I set it to that.
I get to play again.
So I'm playing and I'm like, "Wow :mellow:. I got a hundred dollar stock grip."
I ask the dude that installed it to fix it, and he said, "Well, Normally woodsball players keep it like that prefer it" [Total BS]
Whatever, I just wanted it fixed.
He said he tried it out and shot a case of paint through it and it worked fine. [Moar BS, because it was not fine.]
I didn't know at the time that it still was not fixed, so I go back to the field and try it out. Same problem.
I bought an Indian Creek Designs Promaster from my friend, so I played with that instead.
But now, I started to play woodsball and I want this fixed. So I called up Tippmann. The guy on the phone said to try to reset it to default settings because it may be the board, and if that doesn't work, I can send it in to get it fixed or replaced. Whatever. I know it's not the board and replacing it might not solve the problem.
If anyone can help me out, please do.
Other than that, Single shot works great. I give the E-Grip 4/5 because I know that Full Auto works good.
Posted 14 September 2008 - 07:51 AM
Let me know what you come up with?
Posted 14 September 2008 - 04:08 PM
Dwell - How long the solenoid is tripped and in turn how long the sear will be down
Debounce - how long the board waits until it will be able to register a trigger pull
If you turned the debounce down and fired your trigger will bounce off of the switch making the board think you pulled the trigger again then again and again and so forth until it maxes out its cycling speed or hits the max ROF.
Solution turn up the debounce or re adjust the metal leaf on the switch.
Above all else read the manual until you can program each set point without it.
Helpful Links : Signature Guidelines/General Rules & Regs/Avatar Guidelines/Warning Level Reduction/Spam and Flaming/NecroPosting/Forum FAQs
My: Arsenal , Brigade Page, Feedback 170(+)-0(-)-1(N), Tippmann FAQ's ,$4 for a Life Time of "Peace Of Mind"