Special Ops Paintball: Virtue settings on an Ego5 - Special Ops Paintball

Jump to content


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

Virtue settings on an Ego5 How to get it to diff modes???

#1 User is offline   UMP 

  • Sophomore Member
  • PipPipPip
  • Group: Members
  • Posts: 279
  • Joined: 26-February 07
  • Gender:Male
  • Location:WV
  • Brigade Name:FORD.

Posted 22 March 2008 - 06:20 AM

i just got a Ego5 in a trad and it had the virtue in it. and right now its stuck on PSP((i think)) and i cant get it off/or to another mode haha so any help with that would be great


I Love Autumn (GF)

Guns i have had...05 Ego__Pink Ion Pro__Blue Krusher__Black Magic__03 Prostock__Trillogy Pro__Tippmann A-5__Spyder TLR__Promaster__DM5__

Welcom to my party !!! <--- Click me
0

#2 User is offline   The Hobbit 

  • Formerly Shadowlord
  • PipPipPipPipPipPip
  • Group: Members
  • Posts: 4,078
  • Joined: 15-November 05
  • Gender:Male
  • Location:Western PA

Posted 22 March 2008 - 06:53 AM

Okay to change modes pull the trigger then turn the gun on, It should flash abunch of rainbow colors and crap. Then pull the trigger and hold for 1 or 2 seconds. It should flash a purple light twice, after it has flashed pull the trigger a single time and let go. It should flash the rainbow again and then you can turn it off and it will be in semi.

this might help also
Installing a Virtue Board is extremely easy

Open up the grip from the right side of the marker to expose the board.
Carefully remove the battery, and disconnect the solenoid and eye wires.
Remove the 3 screws holding the stock board in place, and remove the stock board.
Connect the solenoid and eye wires to the Virtue Ego board.
Place the Virtue Ego board into the gun so the buttons and LED line up with the 3 holes in the back of the grip frame.
Screw the Virtue Board back into place with the 3 screws removed in step 3.
Connect the battery, close the grips, and destroy the competition.
Programming Example

If you want to change the debounce to 2 you would:

With the marker off, and Dipswitch 2 in the on position, hold the trigger and turn the marker on.
The LED will now cycle through a rainbow of colors and stop on purple.
Tap the trigger once so the LED glows green.
Pull and hold the trigger until the LED starts to flash (factory default for debounce is 5, so the LED will flash 5 times).
When the LED stops flashing, quickly tap the trigger 2 times.
The LED will now flash 2 times, and then flash through the rainbow of colors, and stop on green, indicating the new value has been set.
To exit programming mode, shut the marker off.
Programming LED Colors
With Dipswitch 2 in the on position, hold the trigger and turn the marker on. The LED will then cycle through a rainbow of colors and stop on purple. Tapping the trigger will then toggle through the different programming modes:
Programming Mode Color
Firing Mode Purple
Debounce Green
Ramp Activation Speed Blue
Ramp Percentage White
Dwell Red
Eye Sensitivity Teal
AMB (Anti-Mechanical Bounce) Yellow
ABS (Anti-Bolt Stick) Flickering Green
Max Rate of Fire Flickering Red



Technical, Warranty and Support Information
Product Manual (PDF)
30 Day Money Back Guarantee
Lifetime Warranty
Contact Service and Support

http://home.virtuepa...virtueEgo05.pdf <--- Manuel

This post has been edited by Shadowlord: 22 March 2008 - 06:58 AM

Posted Image
0

#3 User is offline   UMP 

  • Sophomore Member
  • PipPipPip
  • Group: Members
  • Posts: 279
  • Joined: 26-February 07
  • Gender:Male
  • Location:WV
  • Brigade Name:FORD.

Posted 22 March 2008 - 06:18 PM

i tryed all you said but i can get it off PSP. i hold the trigger and then on...CoLoRs and all that. im trying to do auto response and just ramp but i cant seem to change it.


I Love Autumn (GF)

Guns i have had...05 Ego__Pink Ion Pro__Blue Krusher__Black Magic__03 Prostock__Trillogy Pro__Tippmann A-5__Spyder TLR__Promaster__DM5__

Welcom to my party !!! <--- Click me
0

#4 User is offline   slinkyaroo 

  • Gravity takes over where brains leave off.
  • PipPipPipPipPipPipPip
  • Group: Administrators
  • Posts: 7,844
  • Joined: 08-February 06
  • Gender:Male
  • Location:Belleville, Ont Canada

Posted 22 March 2008 - 09:45 PM

I'm going off memory here.

Pull and hold the trigger. Turn marker on. You are in programming mode.

First mode is firing mode.

Release the trigger then hold it in. The LED should flash xxxx times. xxx= mode. one flash is semi.

Right after it stops flashing pull the trigger the equivalent amount of times to get to the mode you want. I think response is 5 pulls.

The LED wll flash to confirm the setting. Turn marker off.


BTW - YOU CANNOT ENTER PROGRAMMING MODE IF ON TOURNEY LOCK.


.
0

#5 User is offline   UMP 

  • Sophomore Member
  • PipPipPip
  • Group: Members
  • Posts: 279
  • Joined: 26-February 07
  • Gender:Male
  • Location:WV
  • Brigade Name:FORD.

Posted 23 March 2008 - 08:13 PM

thanks Slink thats what i needed YAY


I Love Autumn (GF)

Guns i have had...05 Ego__Pink Ion Pro__Blue Krusher__Black Magic__03 Prostock__Trillogy Pro__Tippmann A-5__Spyder TLR__Promaster__DM5__

Welcom to my party !!! <--- Click me
0

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users