[rambo16]

Alright I recently played with my 07 fusion. Worked great all day, no problems all day.
I got home and took it apart to clean and lubed it up. Well I put it back together just the way I took it apart. So I go to air it up and starts leaking really bad out of the feedneck and barrel. I thought not a big deal there must be a broken o-ring. Not the case, I couldn't find one o-ring broken. I've taken it apart over and over trying to find the problem but nothing. For the life of me I can't figure it out. Think it can be the noid?
Has anyone ever had this problem? Anyone have an idea whats wrong?

This post has been edited by rambo16: 18 March 2008 - 05:47 PM

[The Hobbit]

same thing happened to my nerve. Just take it part and reasemble it. you might have mixed something up accidentily

[rambo16]

I did, multiple times.

[Shmilling]

very possibly might be the noid.... When i had mine i had to send it in to get the leak fixed, They never told me what it was but I'm pretty sure it was my noid. hope this helps in some way.

[rambo16]

I think I have an extra noid that came with it when I bought it.
I'm gona try to switch them out. Maybe thats the problem.

Where was yours leaking?

This post has been edited by rambo16: 18 March 2008 - 06:18 PM

[Shmilling]

The leak I had sounded like it was coming form around the front of the marker and I could feel air coming out of the barrel

[rambo16]

Alright.
I'm gona call dp tomarrow to figure what I should do.

[Shmilling]

yea thats probaly a smart idea they'll help you out. they did a great job helping me out.

[rambo16]

Ok thanks a lot.

[Shmilling]

anytime

[French]

spec ops 24/7, on Mar 18 2008, 05:25 PM, said:

The leak I had sounded like it was coming form around the front of the marker and I could feel air coming out of the barrel

that the lpr not the noid just need a tuning

and for leaking from your feedneck you might of mixed it
spring , hammer , back cap

lpr
the spring with the tip facing inward the marker

[rambo16]

QC MAD KID, on Mar 18 2008, 09:53 PM, said:

spec ops 24/7, on Mar 18 2008, 05:25 PM, said:

The leak I had sounded like it was coming form around the front of the marker and I could feel air coming out of the barrel

that the lpr not the noid just need a tuning

and for leaking from your feedneck you might of mixed it
spring , hammer , back cap

lpr
the spring with the tip facing inward the marker

I'm looking at the manual right now and i'm pretty positive it's put together properly.

[French]

ok them you have a noid problem

[rambo16]

Yeah more than likely.