Well if your going for a custom paint-thrower, a Super Soaker is a good example of what you would need.
If you were to make your own paint-thrower, you would need a device that has:
*Paint tank-Yes, this is where the paint would go
*Pressure chamber-sorta. THis is where you would pump paint into; the more pressure, the more distance.
*Pump- To Pump paint from the paint tank to the pressure chamber.
*Barrel-again, sorta. Basically a tube coming out of the pressure chamber, where you would put a valve that opens when you pull the trigger.
Those would be the basics. I don't feel like sketching up a design, and that was a super-basic decription. You will have to use your imagination if you want to design your own paint-thrower. I love designing things, but a paint-thrower is different from the things I like to work with.
This post has been edited by Philipp122: 28 June 2007 - 02:43 PM