Special Ops Paintball: The New APE Board V2 - Special Ops Paintball

Jump to content


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

The New APE Board V2 The latest APE board

#1 User is offline   GLCFTomcat 

  • Forum Member
  • PipPip
  • Group: Members
  • Posts: 76
  • Joined: 03-February 07

Posted 02 January 2008 - 03:17 PM

The Glen Morris Mercenaries are pleased to announce that we, the only team in Canada to have done so, have successfully concluded a full field test and review of the new APE Rampage board V2 built specifically for the BT series of markers.

The board is extremely easy to install into the marker, can be adjusted to fire 5 to 30bps...all without having to power down AND has several firing modes including three round burst, reactive, full auto, rampage, psp3, turbo plus and NXL.. AND the board is amazingly easy to program making it a must have for any BT owner. We have just finished our second video detailing our findings and installation guide. ......the Glen Morris Mercenaries highly recommend this board, so if you are looking for a great upgrade for your BT.....snap one of these units up as soon as they are released on the market....you won't regret it!

Posted Image
Posted Image





Thanks goes out to the people at BT Warrior for allowing us this opportunity as well as Jim over at APE Rampage for sending us the test merchandise and last but not least...our sponsor H&H for allowing us the space to test the product.
Posted Image
http://www.hhpaintballonline.com/
Posted Image
http://bt.warrior-online.com/
Posted Image
http://goapeonline.com



Heres the link to our first test of this product on YouTube
http://www.youtube.c...h?v=SakGAKIXjd0

....our second and far more indepth video review will be up shortly.
Chief Editor - Catshack Reports http://www.catshackreports.com/

Sponsored by Woodstock Revolutions, Area 51 and Flagswipe Paintball
0

#2 User is offline   RPGDAWG 

  • Ride Or Die Son
  • PipPipPip
  • Group: Members
  • Posts: 254
  • Joined: 31-December 06
  • Location:Ohio

Posted 02 January 2008 - 03:59 PM

agreed. Most of us at the A5OG have sent our A-5 boards back in for the V2 upgrade and lwhen we got them back love the new features of the board.

it made an already great board better.
0

#3 User is offline   John Cornman 

  • Forum Member
  • PipPip
  • Group: Members
  • Posts: 174
  • Joined: 18-November 07

Posted 02 January 2008 - 04:00 PM

with a BT or a A5 or X7 would you not chop or break balls like mad at 30bps??

This post has been edited by John Cornman: 02 January 2008 - 04:04 PM

0

#4 User is offline   GLCFTomcat 

  • Forum Member
  • PipPip
  • Group: Members
  • Posts: 76
  • Joined: 03-February 07

Posted 02 January 2008 - 05:35 PM

View PostJohn Cornman, on Jan 2 2008, 04:00 PM, said:

with a BT or a A5 or X7 would you not chop or break balls like mad at 30bps??


I can't really speak for the A-5 or X-7 but a BT with a rip clip can only handle 20bps before getting into chopping problems, however it is my understanding the people at BT are working on this issue.
Chief Editor - Catshack Reports http://www.catshackreports.com/

Sponsored by Woodstock Revolutions, Area 51 and Flagswipe Paintball
0

#5 User is offline   John Cornman 

  • Forum Member
  • PipPip
  • Group: Members
  • Posts: 174
  • Joined: 18-November 07

Posted 02 January 2008 - 06:30 PM

View PostGLCFTomcat, on Jan 2 2008, 07:35 PM, said:

View PostJohn Cornman, on Jan 2 2008, 04:00 PM, said:

with a BT or a A5 or X7 would you not chop or break balls like mad at 30bps??


I can't really speak for the A-5 or X-7 but a BT with a rip clip can only handle 20bps before getting into chopping problems, however it is my understanding the people at BT are working on this issue.



but who needs to shoot 30bps??

1 shot one down
0

#6 User is offline   GLCFTomcat 

  • Forum Member
  • PipPip
  • Group: Members
  • Posts: 76
  • Joined: 03-February 07

Posted 03 January 2008 - 05:11 AM

View PostJohn Cornman, on Jan 2 2008, 06:30 PM, said:

View PostGLCFTomcat, on Jan 2 2008, 07:35 PM, said:

View PostJohn Cornman, on Jan 2 2008, 04:00 PM, said:

with a BT or a A5 or X7 would you not chop or break balls like mad at 30bps??


I can't really speak for the A-5 or X-7 but a BT with a rip clip can only handle 20bps before getting into chopping problems, however it is my understanding the people at BT are working on this issue.



but who needs to shoot 30bps??

1 shot one down

Lol...I am fine with 20bps.....the board in the Rip Clip is only capable of 20bps before running into probs....but your quite correct.....I foresee a whole lot of overshooting at 30bps
Chief Editor - Catshack Reports http://www.catshackreports.com/

Sponsored by Woodstock Revolutions, Area 51 and Flagswipe Paintball
0

#7 User is offline   sigma 

  • Forum Newbie
  • Pip
  • Group: Members
  • Posts: 1
  • Joined: 27-September 07

Posted 17 January 2008 - 05:12 PM

View PostGLCFTomcat, on Jan 3 2008, 07:11 AM, said:

View PostJohn Cornman, on Jan 2 2008, 06:30 PM, said:

View PostGLCFTomcat, on Jan 2 2008, 07:35 PM, said:

View PostJohn Cornman, on Jan 2 2008, 04:00 PM, said:

with a BT or a A5 or X7 would you not chop or break balls like mad at 30bps??


I can't really speak for the A-5 or X-7 but a BT with a rip clip can only handle 20bps before getting into chopping problems, however it is my understanding the people at BT are working on this issue.



but who needs to shoot 30bps??

1 shot one down

Lol...I am fine with 20bps.....the board in the Rip Clip is only capable of 20bps before running into probs....but your quite correct.....I foresee a whole lot of overshooting at 30bps


Hello to all.
New here.
I have a X-7 w/ egrip and was wondering if the new ape will fit it.
Any help would be appreciated.
Stay Safe
Sigma
0

#8 User is offline   Kodiak 

  • Captain DHP
  • PipPipPipPip
  • Group: Members
  • Posts: 821
  • Joined: 28-January 05
  • Gender:Male
  • Location:Fayetteville, NC
  • Brigade Name:Kodiak

Posted 17 January 2008 - 05:54 PM

APE is currently in the testing stage of a board for the X7.
0

#9 User is offline   GLCFTomcat 

  • Forum Member
  • PipPip
  • Group: Members
  • Posts: 76
  • Joined: 03-February 07

Posted 09 February 2008 - 12:55 PM

A little late in coming but heres the last part of the Mercenaries video review of the new APE board.....we felt it was not a bad idea to add an installation guide showing a step by step procedure on how to put the board into the BT marker....whatever the case we hope this helps clear up any difficulties anyone might be having with respect to the APE board....a great product which the GMM give 2 thumbs up as a great mod for the BT marker.


This video was shot in cooperation with H&H Paintball, BT Warrior and Advanced Paintball Electronics. Brought to you by The Glen Morris Mercenaries.
Thanks SOGSnakebite for all the hard work.

http://www.youtube.c...h?v=eRSPb0Hlr7o
Chief Editor - Catshack Reports http://www.catshackreports.com/

Sponsored by Woodstock Revolutions, Area 51 and Flagswipe Paintball
0

#10 User is offline   Knightwolf16 

  • Master Member
  • PipPipPipPipPipPip
  • Group: Members
  • Posts: 4,759
  • Joined: 01-March 06
  • Gender:Male
  • Location:Methuen, Ma
  • Brigade Name:Knightwolf16

Posted 16 June 2008 - 02:42 AM

View PostJohn Cornman, on Jan 2 2008, 07:00 PM, said:

with a BT or a A5 or X7 would you not chop or break balls like mad at 30bps??

There is breakage issues with the A5 when the BPS goes over 20 BPS. The Cyclone has to be upgraded with an aluminum rachet, an aluminum piston, and a QEPH to be able to reach the higher rates of fire
"Cry "Havoc!" and let slip the dogs of war." William Shakespeare
Nous sommes les seigneurs de la guerre, tremblons avant nous
The Lords of War The Lords of War on MySpace The Lords of War MSN Group Page
0

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

2 User(s) are reading this topic
0 members, 2 guests, 0 anonymous users