Special Ops Paintball: T9 Efficiency with First Strike - Special Ops Paintball

Jump to content


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

T9 Efficiency with First Strike Rate Topic: -----

#1 User is offline   skieaskhell 

  • Forum Newbie
  • Pip
  • Group: Members
  • Posts: 23
  • Joined: 17-March 10

Posted 09 April 2010 - 07:38 AM

This is to give everyone a heads up on the T9 with the First Strike kit:

You will have diminished efficiency: The First Strike kit comes with a stiffer spring and a different bolt. The bolt requires more pressure to power the round, which required the stiffer spring to return it without damaging the body. This consumes more gas.

I have a T9 with the longbow kit and the FS kit, and was surprised that I could only get about 17-19 shots out of a 12-ie.

Per Tiberius Arms this is normal, and you should plan accordingly when out on the field.

I ran into this issue on my last game, I had 4 shots left in my longbow mag, but no gas to run it. :tup:

If you want the higher efficiency you will need to change back to the regular bolt and spring.
0

#2 User is offline   Wh0pp3r 

  • Squad Marksman
  • PipPip
  • Group: Members
  • Posts: 59
  • Joined: 06-May 09
  • Gender:Male
  • Location:near Edmonton, Alberta, Canada

Posted 09 April 2010 - 04:21 PM

Are you sure it just hasn't been cold outside or the velocity is higher than you usually have it?
From what I've heard the effiency doesn't drop THAT much and the bolt is EXACTLY the same as the pre ST versions.

This post has been edited by Wh0pp3r: 09 April 2010 - 04:21 PM

-Vinny
T9 Longbow
0

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users