Dual BT-4 Machine Gun
Posted 27 November 2007 - 06:59 PM
9 out of 10 teens listen to rap. if you're one of the ones that stays true to proggressive metal/classic rock,put this in your sig.
My favorite mode on a smart parts gun is OFF!!
Save a rock throw an ion.
Posted 27 November 2007 - 07:37 PM
Also, how do you suggest i rig the front parts of the guns together? On the back i am using the asa holes, which will be bolted to a piece of metal.
This post has been edited by Bobbjoe: 27 November 2007 - 07:38 PM
Posted 28 November 2007 - 02:34 PM
SPPL 2nd Place Rookie Division 2008 @ Bearclaw
Executive Officer of the 352nd Panzenjagers OK D Day (2008)
CO of the 709th Artillerie Regiment, OK D Day (2009)
Posted 28 November 2007 - 06:22 PM
You may find you get shoot down, ALTHOUGH.. .with a decent Reg on your bottle you shouldn't.
You could get a bracket that bolts between the 2 picatinny rails... or possibly one on top and one underneath... Shouldn't be too much to sort out.
Posted 29 November 2007 - 07:08 AM
Good luck with your turret, and see ya at D-Day.
Posted 29 November 2007 - 05:35 PM
you could always weld the two guns together with some strips of steel on the rails and grip.... just a thought.
then again, it would complicate cleaning them or checking for malfunctions....
Posted 29 November 2007 - 06:39 PM
This post has been edited by Bobbjoe: 29 November 2007 - 06:39 PM