Special Ops Paintball: arikon ACP - Special Ops Paintball

Jump to content


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

arikon ACP I HATE 12grams!!! Rate Topic: -----

#1 User is offline   SNIPER TY 

  • Furtim, Patientia, Veneratio
  • PipPip
  • Group: Members
  • Posts: 143
  • Joined: 16-February 06
  • Gender:Male
  • Location:Raleigh NC
  • Brigade Name:SNIPER TY

Post icon  Posted 15 April 2010 - 06:21 AM

i have a arikon ACP (2.0 i think... dont fish it out of my gun closet to check) i am very pleased with it... BUT... ive been haven to cary around a small monkey wrench to change out the 12 garm CO2s fast enough to get air in the marker before the 12 gram is spent. ive been meanin to put a bottom line on it so i could run it off remote air seein as i carry an extra tank anyways. but i am not nearly as knowlegable of pistols as i am full size markers. so i wanted to know how i would go about moding it with a steel braided bottom line. if i remember right there are screw holes on the bottom of the handle for an ASA. i just gota run the line to it. any help would be appriciated.
THANK YOU,
:facepalm: SNIPER TY :huh:

This post has been edited by SNIPER TY: 15 April 2010 - 06:22 AM

Don't run, you will only die tired!!!
A case of paint for you means 2,000 paintballs but for me that's the body count
"And God gave man three things with which to fix all of man's problems: WD-40, duct tape, and a hammer."
are u DO NOT DODGE THE SWEAR FILTERS Warning Issued kidding me, that's the only thing i can say
TEAM CAPTAIN OF SHADOW UNIT
COMMANDER OF CAROLINA SILENCE: MERCINARY SNIPERS
View My Special Ops Brigade Page
commander # 145 / sniper # 1 / broadsword # 119
0

#2 User is offline   Thumper113 

  • Senior Member
  • PipPipPipPipPip
  • Group: Members
  • Posts: 1,830
  • Joined: 01-July 09
  • Gender:Male
  • Location:Chicago, Illinois
  • Brigade Name:Ace0rz

Posted 15 April 2010 - 11:58 AM

try using different 12 grams for the time being.

crossman 12 grams tend to not come out no matter how much you oil the puncture valve..

try brass eagle 12 grams or special forces 12 grams
http://www.tippmannparts.com/Special-Force...ount-p/7035.htm
Special Ops Paintball Elite - Earned at Living Legends 3
Paintball Explosion
FTP inc.
0

#3 User is offline   SNIPER TY 

  • Furtim, Patientia, Veneratio
  • PipPip
  • Group: Members
  • Posts: 143
  • Joined: 16-February 06
  • Gender:Male
  • Location:Raleigh NC
  • Brigade Name:SNIPER TY

Posted 16 April 2010 - 05:08 AM

View PostThumper113, on Apr 15 2010, 02:58 PM, said:

try using different 12 grams for the time being.

crossman 12 grams tend to not come out no matter how much you oil the puncture valve..

try brass eagle 12 grams or special forces 12 grams
http://www.tippmannparts.com/Special-Force...ount-p/7035.htm


thats the first thing i thought of to. i tried to find the 12 gram with the thinest seal on it. so i have tried a bunch of different 12 grams but the issue is gettn um on without waisting all the gas in the cylinder. the ACP doesnt have a quick change CO2 like most pistols. it has a screw on metal cap that first pushes the puncture valve into the cartridge then holds the cylinder in the cartridge well. so wen i drop the 12 gram into the tube, i have to screw down the metal cap before all the CO2 leaks out. and with the preasure form the CO2 cartridge, im forced to remove the barrel and use a small monkey wrench just to change to CO2 and get it seated before it all leaks out.
Don't run, you will only die tired!!!
A case of paint for you means 2,000 paintballs but for me that's the body count
"And God gave man three things with which to fix all of man's problems: WD-40, duct tape, and a hammer."
are u DO NOT DODGE THE SWEAR FILTERS Warning Issued kidding me, that's the only thing i can say
TEAM CAPTAIN OF SHADOW UNIT
COMMANDER OF CAROLINA SILENCE: MERCINARY SNIPERS
View My Special Ops Brigade Page
commander # 145 / sniper # 1 / broadsword # 119
0

#4 User is offline   Thumper113 

  • Senior Member
  • PipPipPipPipPip
  • Group: Members
  • Posts: 1,830
  • Joined: 01-July 09
  • Gender:Male
  • Location:Chicago, Illinois
  • Brigade Name:Ace0rz

Posted 17 April 2010 - 08:19 AM

yea, im having issues with my overlord.. the thing pisses out co2 the second i screw it down..

il keep my eye out for parts for it.. but i dont think i will ever use it again..

im upgrading to the tpx.. :D

btw thanks Moati!! :ThumbsUp:
Special Ops Paintball Elite - Earned at Living Legends 3
Paintball Explosion
FTP inc.
0

#5 User is offline   SNIPER TY 

  • Furtim, Patientia, Veneratio
  • PipPip
  • Group: Members
  • Posts: 143
  • Joined: 16-February 06
  • Gender:Male
  • Location:Raleigh NC
  • Brigade Name:SNIPER TY

Posted 19 April 2010 - 05:07 AM

ok. hope that works out better for you bro. but i have seen a bottom line on pistols before so it can be done. does anybody know where i can find a compatible bottom line or how to make the connection to the pistol? cause id much rather deal with this pistol than try to find a different sidearm

This post has been edited by SNIPER TY: 19 April 2010 - 05:08 AM

Don't run, you will only die tired!!!
A case of paint for you means 2,000 paintballs but for me that's the body count
"And God gave man three things with which to fix all of man's problems: WD-40, duct tape, and a hammer."
are u DO NOT DODGE THE SWEAR FILTERS Warning Issued kidding me, that's the only thing i can say
TEAM CAPTAIN OF SHADOW UNIT
COMMANDER OF CAROLINA SILENCE: MERCINARY SNIPERS
View My Special Ops Brigade Page
commander # 145 / sniper # 1 / broadsword # 119
0

#6 User is offline   Never Dead's twin 

  • WARPAINT
  • PipPipPip
  • Group: Members
  • Posts: 277
  • Joined: 18-November 07
  • Gender:Male
  • Location:Frankfort, KY
  • Brigade Name:BLACK OPS RANGER

Posted 19 June 2010 - 07:14 PM

View PostSNIPER TY, on Apr 19 2010, 05:07 AM, said:

ok. hope that works out better for you bro. but i have seen a bottom line on pistols before so it can be done. does anybody know where i can find a compatible bottom line or how to make the connection to the pistol? cause id much rather deal with this pistol than try to find a different sidearm



You sure you are not cross threading it? Mine worked fine until I got a leek that I dont have the tools to get to, but before that I did make a adaptor for a full sized tank, but you dont want to do that, you want to buy and 12 gram that has a threaded hole in it so you can run the line from it, you have to take the tac. rail off. Look around on the web, last I checked it was not hard to find.
0

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users