Posted 01 January 2008 - 05:49 PM
set your pressure to about 180
if you dont have a manual and you know what version it is check here
Posted 02 January 2008 - 09:23 AM
Debounce (green) a safe setting is 2-3 blinks.
Dwell (purple) 12 - 14 blinks for the Parker Noid / Humphrey noids between 14 - 16 blinks
AMB (blue) set this at 3 blinks
ABS (red) between 5 - 6 blinks reduces or eliminates FSDO
Now these settings work great in the 6.1 version software,and I think the only difference between the older version and 6.1 that concerns your year Shocker is the AMB setting where it has between 1-5 blink settings where the older version did not. And being your SHocker is an 06,in a perfect world yours should have came out with a Humphrey noid. Hope this helps you,I know it has for many Shockers I have tuned.
www.titanspaintball.com MVT 2009 Viper RTS Sherwood Forest
Posted 03 January 2008 - 11:59 AM
The Shocker NXT manual explains how to optimize the dwell setting for your gun (works the same for an SFT) and you can download that from SP's web site.
I also go through the proceedure in this video on the NXT, at about 30 minutes into the vid, in the section on electronic adjustment:
Pretty much, most everything in that video applies to the SFT as well, since the markers are so alike.