Please read all the way through this post before proceeding.
Lets start from the beginning. First, make sure there is NO air in the marker. Have you aired the marker up yet? If you have and have not shot it, stop now, and ignore anything from this point forward in my post and let me know. Make sure your marker is off. Press the power button so it turns on. The light should be blinking GREEN slowly. Stick your finger all the way into the breach through the feed neck. The light should turn solid green. If it does not, let me know. Next, hit the power button again so that the light is blinking more rapidly. SLOWLY pull the trigger, and the noid SHOULD click. If it does not. hit the power button again to turn the eyes back on. It should be slowly blinking again. Stick your finger into the breach, so the light should go solid green. Slowly pull the trigger. If the noid does not click, turn the marker off, loosen up the trigger adjustment screws (one in the trigger going toward the trigger frame, and one in the trigger frame above the trigger). Repeat the above steps. If it still does not work, check and make sure everything is plugged in correctly on the board. If it still does not work. Contact me via PM, I will give you DPs phone # to call them dirrectly.
Also, on second thought, you should use a paintball instead of your finger, just in case....
This post has been edited by Chaos: 09 October 2008 - 05:26 PM