Special Ops Paintball: STENCLS - Special Ops Paintball

Jump to content


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

STENCLS Do It Yourself Rate Topic: -----

#1 User is offline   REED 

  • Forum Newbie
  • Pip
  • Group: Members
  • Posts: 4
  • Joined: 22-April 08

Posted 25 August 2008 - 07:49 PM

2" painters tape, 2" masking tape, a pack of pens, a sharpie, piece of 1/2" pvc, cutting board,
xacto knife, razer blade, ruler,
[attachment=26589:IMG_1501.JPG]
[attachment=26590:IMG_1503.JPG]
[attachment=26591:IMG_1504.JPG]
leve about 2" of tape at each end of the male stencles to help line up the masking tape,
I use the masking tape to keep the stencles straight,
[attachment=26592:IMG_1506.JPG]
[attachment=26593:IMG_1507.JPG]
[attachment=26594:IMG_1509.JPG]
peel up the tape at the same time use the razer to help lift the stencles from the cutting board,
keeping them stuck to the masking tape,
[attachment=26595:IMG_1512.JPG]
do the female stencles the same way,
[attachment=26596:IMG_1488.JPG]
[attachment=26597:IMG_1490.JPG]
[attachment=26598:IMG_1491.JPG]

Hopefully this can help with makeing your own stencles,

This post has been edited by REED: 25 August 2008 - 08:16 PM

0

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users