Special Ops Paintball: MR2 macroline - Special Ops Paintball

Jump to content


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

MR2 macroline Rate Topic: -----

#1 User is offline   junk 

  • Forum Newbie
  • Pip
  • Group: Members
  • Posts: 8
  • Joined: 04-July 07
  • Gender:Male
  • Location:Somewhere in Wisconsin
  • Brigade Name:Junk

Posted 28 May 2010 - 10:26 AM

Ok so the expansion chamber, can I get an adapter and run macro line straight from that into the spec ops combat combat stock, or do I need to add a reg somewhere in there? and no, i am not using CO2. just wondering if that was a possibillity.

pic below or attached idk, but its somehwere

Attached File(s)

  • Attached File  mr2.jpg (42.02K)
    Number of downloads: 13

Dosen't Look like Anything...
0

#2 User is offline   ger 

  • Shine
  • PipPipPipPipPip
  • Group: Members
  • Posts: 1,676
  • Joined: 31-August 06
  • Gender:Male
  • Location:Western PA

Posted 28 May 2010 - 10:47 AM

What expansion chamber? Is that an Air-thru stock or are you modding it?

With the proper macroline fittings, yes, you can run the line from the vertical ASA (what your Qloader is attached to) directly to the stock.
ger
You bought the brand, not my allegiance.
0

#3 User is offline   junk 

  • Forum Newbie
  • Pip
  • Group: Members
  • Posts: 8
  • Joined: 04-July 07
  • Gender:Male
  • Location:Somewhere in Wisconsin
  • Brigade Name:Junk

Posted 28 May 2010 - 03:22 PM

View Postger, on May 28 2010, 10:47 AM, said:

What expansion chamber? Is that an Air-thru stock or are you modding it?

With the proper macroline fittings, yes, you can run the line from the vertical ASA (what your Qloader is attached to) directly to the stock.


The stock has an opening which looks like it was made for running macroline through, but it looks like I'd have to drill in the butt of the gun (not the plate but right below it) in order to put the quick disconect on. thanks for the correction on the ASA. I'm confused though, would I run the fitting from the bottom of the ASA or would I unscrew that and find the male/female part to connect direct to the marker body? Third, is there a post somewhere on how to properly attach and fit macroline so I don't screw myself over?

Thanks
Dosen't Look like Anything...
0

#4 User is offline   coveringfire 

  • Forum Member
  • PipPip
  • Group: Members
  • Posts: 95
  • Joined: 18-August 06
  • Gender:Male

Posted 29 May 2010 - 06:50 AM

You run it just from the bottom of the vert asa. Techpb has a good video on youtube explaining how to do it. Just search macroline its the first one. Also remember when buying the fittings for he mr2 that spyers use metric fittings so fittings used on other paintball guns wont fit the threads of the vert asa. But it doesnt matter what quick disconnect u get because it will be attached to the macro line and i think youd be glueing it in place.
Stalking since '06, Postin since '09, Playin since '04. Feedback
At my lemonade stand I used to give the first glass away free and charge five dollars for the second glass. The refill contained the antidote.
0

#5 User is offline   junk 

  • Forum Newbie
  • Pip
  • Group: Members
  • Posts: 8
  • Joined: 04-July 07
  • Gender:Male
  • Location:Somewhere in Wisconsin
  • Brigade Name:Junk

Posted 29 May 2010 - 07:09 AM

Thanks a bunch
Dosen't Look like Anything...
0

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users