Special Ops Paintball: Diablo Heat Review - Special Ops Paintball

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

Diablo Heat Review Rate Topic: -----

#1 User is offline   mapexgurl 

  • aka code_red
  • PipPip
  • Group: Members
  • Posts: 157
  • Joined: 21-June 07
  • Gender:Female
  • Location:Indianapolis
  • Brigade Name:code_red

Posted 31 March 2008 - 12:24 PM


Environmental Conditions

Temperature: 55*F Humidity: 87%

Wind Speed: 13Mph

Weather Conditions: cloudy rained earlier


Paint Information

Date of Purchase: 03/29/08

Brand: Diablo

Paintball Size: +/- .684 very small (using Empire ball sizer)


Marker Setup Information

Velocity: 285 FPS

Make: Air Gun Designs Model: Tac One

Air Source: No2 Crossfire

Barrel: PPS Brass .685

These were green shell/ yellow fill. Visibly there were no dimples and the seams were reasonable. The shells were a little hard, but not extremely hard. They cost about $35 a case at my local paintball shop. Fill was a little watery. When I fired them they would curve every which way once it reached my target. These are ok if you just want to shoot in your back yard, but I wouldn't recommend them for play. The accuracy just wasn't there and I had a fairly good bore match. It could have been a little tighter but the curve was just too much for me.

#2 User is offline   junckie25 

  • Junckie25
  • PipPipPip
  • Group: Members
  • Posts: 293
  • Joined: 02-January 08
  • Gender:Male
  • Location:south carolina
  • Brigade Name:Junckie25

Posted 31 March 2008 - 12:50 PM

Yeah, last time I used that type of paintballs I would snap shoot and the paintball would do a little spirl and hit the ground. Maybe it was old or something though.
Smile.... tomorrow will be worse.


#3 User is offline   shadow_772 

  • Never compromise, even in the face of armageddon
  • PipPipPipPipPipPip
  • Group: Members
  • Posts: 4,272
  • Joined: 05-September 05
  • Gender:Male
  • Location:MA
  • Brigade Name:Shadow_772

Posted 03 April 2008 - 01:18 PM

I have used it before with no problems. It wasn't the best paint, but it wasn't bad. I was using a PMR, SL68 II, an Invert Mini and a couple other markers. The fill isn't very bright though.

Share this topic:

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users