Special Ops Paintball: VL Evlution 2 / egg 2 - Special Ops Paintball

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

VL Evlution 2 / egg 2 Rate Topic: -----

#1 User is offline   Dark Side 

  • Forum Member
  • PipPip
  • Group: Members
  • Posts: 67
  • Joined: 27-December 05
  • Location:Panama city FL
  • Brigade Name:Dark Side

Posted 11 January 2006 - 05:44 PM

Ahem..... Of the two years that I have used mine I have encountered only one problem. That problem is that my board, a "Y" which was never upgraded, burned out after I left the hopper on. The fall/push rate is around 19 a second which is not a problem for a majority of the markers out there. I used mine on my Xmag for some time, like I said with no problems. A good upgrade to have is the Z board. It retails for around $15 at most major PB sites, Action Village, 888, etc.

Some people have had the problem of the raceway breaking while pushing/ twisting it into their feedneck. The raceway is a two piece design that clasps to itself inside the hopper shell. This two piece design makes it a bit flimsy but is needed or some people would not be able to remove the servo when needed.

Another upgrade that has come out in the past year is a thicker shell. The original Evl 2 used thin screw mounts around the outer raceway shell which are prone the cracking during harsh play.

All in all I think this is a good hopper for the money. A smaller package than the Halo and just slightly slower. This of course can be fixed with the Z board. You will never out shoot this hopper using a mechanical marker.
A good 9 out of 10.

This post has been edited by Dark Side: 11 January 2006 - 08:30 PM

"I'm the Dagger in your back"
Commander "Team Dark Side"
user posted image

#2 User is offline   Maj Tom 

  • This is the funvee. Not the humdrumvee
  • PipPipPipPipPipPipPip
  • Group: Retired/Inactive Moderator
  • Posts: 5,987
  • Joined: 02-September 05
  • Gender:Male
  • Location:Davisburg, Michigan
  • Brigade Name:Maj Tom

Posted 11 January 2006 - 05:46 PM

Okay that's better, Niether one of my 3 have burned out yet.

This post has been edited by Maj Tom: 13 January 2006 - 04:56 PM


#3 User is offline   Sr.Sniper 

  • i'll lite you up!!!
  • PipPip
  • Group: Members
  • Posts: 86
  • Joined: 01-February 05
  • Brigade Name:Autococker_Fan

Post icon  Posted 13 January 2006 - 04:38 PM

i also have this hopper and it was on of the best buys that i have made great choice.

#4 User is offline   Led Zeppelin 

  • Now own a EGO 06
  • PipPipPip
  • Group: Members
  • Posts: 667
  • Joined: 07-June 05
  • Location:Farmington, Ct
  • Brigade Name:Led Zeppelin

Posted 15 January 2006 - 12:57 PM

only thing is the egg should get new feedneck I don't trust it at all I guess you could mod it but still....

#5 User is offline   Paintballer-001 

  • FO SHO? or... NOT!
  • PipPipPipPip
  • Group: Members
  • Posts: 766
  • Joined: 23-July 05

Posted 29 January 2006 - 09:58 AM

add some black wiring tape if your a faid of it breaking or even if you dont like the clear part.
IPB Image

#6 User is offline   hunter6999999999999999 

  • Don't be jealous of me because I have more posts than you
  • PipPipPipPipPipPip
  • Group: Members
  • Posts: 3,303
  • Joined: 02-August 05
  • Gender:Male
  • Location:Greenville, North Carolina
  • Brigade Name:hunter69

Posted 29 January 2006 - 10:15 AM

man i love my egg its had been dropped in a river and filled up with water and it still ran fine all i had to do was wipe it clean. only problem that i had with it is that i had to sand the feed neck to fit my piranha, then when i got my cocker the feed neck was too small, i know that most of you would say why don't you get an new feed neck for your cocker but the thing is that on my pro stock the feed neck doesnt remove so now i have to tape it with duct tape to fit my cocker. if i would have to buy another hopper it would definitely be an eggy. I recommend this hopper to anyone woodsballer or to a speedballer.

This post has been edited by hunter6999999999999999: 29 January 2006 - 10:19 AM


#7 User is offline   takedown65 

  • Midnight Raider
  • PipPipPipPip
  • Group: Members
  • Posts: 796
  • Joined: 23-August 05
  • Location:somers NY (westchester)

Posted 29 January 2006 - 10:57 AM

well my race way did crack so i got a replacment one for 10 bucks the battery cover seems very fragile and i now of alot of people whos had theirs break but consedering i got it for around 30 dollars i say its a pretty good hopper

Midnight RaidersMy feedback


#8 User is offline   death of a nation 

  • Forum Newbie
  • Pip
  • Group: Members
  • Posts: 1
  • Joined: 12-February 06
  • Brigade Name:death of a nation

Posted 12 February 2006 - 03:43 PM

yea and egg is definitely a great hopper for the money and it can nearly match up with a halo b or an empire. if you're on a tight budget and want a good eletro hopper, then this is for u

Share this topic:

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users