Remote Clogged? or is it my stock?
Posted 07 May 2010 - 09:06 PM
The stock actually screws right into the ASA of the gun, where the tank would normally go. I removed the stock and tried to physically blow air with my mouth through the remote line and out the stock. I have to try pretty hard just to get a trickle of air. Is this normal, or should air flow pretty freely through?
The stock has some small holes under a collar that are supposed to supply air to the ASA. These might be too small I'm thinking ( maybe the stock isn't designed for the gas needs of an A5 running a cyclone) and if I drilled them out to a larger size perhaps I'd get more air to the gun.
Posted 07 May 2010 - 09:10 PM
Posted 07 May 2010 - 09:20 PM
Yes, it works fine with a tank attached directly to the ASA. It also seems to be fine using the remote the way I had it set up before. . . I'm starting to think it might be the stock itself restricting flow somehow. I have tried the knob at different tightness on the remote and it doesn't seem to matter where I put it. I've been using this remote for years with no problems.