Lots of HPA questions Please help fast!
Posted 28 April 2009 - 10:04 PM
2. How do you properly unscrew an HPA tank?
3. If the output pressure is 450 PSI, my markers regulates to about 185 PSI (SP1), will this lead to any drop off or problems?
Posted 28 April 2009 - 10:10 PM
2. The same way you unscrew a CO2 tank. Although it's easier if you have an On/Off ASA to get the pressure down in the gun, which allows you to get the tank off easier.
3. What kind of marker are you using? You can run a high pressure or low pressure tank. You're regulator will get the PSI down to what it needs to be no matter what, but knowing your marker would be helpful.
EDIT: Just saw you are using an SP1. I'd recommend going with a high pressure tank, just in case you ever change to a different gun. Just about any gun will work off a HP tank, only a few will use strictly use an LP tank.
Any other questions?
This post has been edited by blackcelldrumr15: 28 April 2009 - 10:12 PM
Posted 29 April 2009 - 04:46 AM
Worr gas tank. Totem air reg. Its main competition is this:
Longer hydro, high pressure tank. Carleton tank and crossfire reg. This one is 115.
Posted 29 April 2009 - 06:36 AM
For your questions...
1: It depends on the hydro. If there is one year left on it, then no, its not really worth it. But if there is a couple years left, and the tank is in really good condition, then yes, it would be worth it. But in my mind, it would be easier to just own a 68/4500. Its almost the same size, plus there are many out there, so the price is lower on them.
2: Same as any other tank. Untwist it a couple turns, shoot out all the air, then unscrew the tank. Simple.
3: It should not, but I have heard of that problem with low pressure tanks. I would say just get a high pressure tank, then you can use it on any other gun you own, even Tippmanns and Spyders.