Bad news first:
No screws to hold the grips in, I couldn't find any that fit so I used it without grips
The offset rail on the top is only on there cosmetically with 1 screw, needs another nut to be properly mounted.
The trigger to the board is not soldered in, just tied and taped, worked just fine but should be soldered for longevity.
The board installed is the old style A5 e-trigger board. I personally prefer it as you can adjust rate of fire AND firing mode without dealing with flashing lights, just use a screwdriver and turn!
Also comes with an Ape Rampage board that the solenoid has become disconnected from the board. I read on the ICP forum that Ape will replace or fix it at no charge but I haven't had the drive to send it in.
I started polishing the internals, got it mostly done but haven't done the nitty gritty detail work.
Full cyclone upgrades (squishy paddles, QEPH and Vortex mod) I think it's $90 new.
Also comes with the standard A5 air line if you want to use a remote instead of a 13/30.
Full parts kit.
Think that's it... PM or post if you have any other questions, I may have just left things out.
Anyway, comes as pictured without 13/30 for $400 shipped SOLD (Conus) and paypal'd, or I can include a 13/30 for an additional $45 (not for sale separately, please don't ask) The 13/30 has a chip on the very tip of the reg, but it still seals just fine when screwed into a marker. I do ship to Canada at cost (shipping up there has gotten expensive!).
Yes please! CCM pumps, 04 vikings, phantoms... Maybe a borg...
Not very interested in spyders, SP, cocker pumps that aren't CCM framed, cocker semi's, tippmanns, 03 vikings or non k-framed brass.
This post has been edited by Redbeard the Pirate: 26 February 2010 - 10:02 AM