Special Ops Paintball: Shocker Dwell - Special Ops Paintball

Jump to content


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

Shocker Dwell

#1 User is offline   malaysniac 

  • YOU JUST GOT THE MALAYSNIA!!
  • PipPip
  • Group: Members
  • Posts: 116
  • Joined: 14-August 06
  • Gender:Male
  • Location:Pacific Grove, CA
  • Brigade Name:JRDT

Posted 30 December 2007 - 11:09 PM

I just got a used 06 SFT and I don't think it was tuned properly by the last owner. It has a Dynasty board in it and I was wondering if anyone had any suggestions for dwell.

Thanks,

Malaysniac
Captain of Team Nemesis, Pacific Grove, CA
0

#2 User is offline   The Hobbit 

  • Formerly Shadowlord
  • PipPipPipPipPipPip
  • Group: Members
  • Posts: 4,078
  • Joined: 15-November 05
  • Gender:Male
  • Location:Western PA

Posted 31 December 2007 - 04:06 PM

What type of noid do you have?
Black = parker= about a dwell of 30
Silver/white = humphrey= dwell of about 40
then just go and play from there
Posted Image
0

#3 User is offline   Wils91 

  • Band of Brothers
  • PipPip
  • Group: Members
  • Posts: 195
  • Joined: 08-November 05
  • Gender:Male
  • Location:Smithfield PA
  • Brigade Name:Wils91

Posted 01 January 2008 - 05:49 PM

for the dynasty board set the dwell at like 12 -14 ms
set your pressure to about 180

if you dont have a manual and you know what version it is check here
http://www.tadaotechnologies.com/productca...amp;idproduct=9
0

#4 User is offline   Dusty1 

  • Team Titans
  • PipPipPip
  • Group: Members
  • Posts: 522
  • Joined: 05-May 05
  • Gender:Male
  • Location:Jasper Indiana
  • Brigade Name:dusty1

Posted 02 January 2008 - 09:23 AM

Here are a few settings used by team Dynasty,from Rodney,that myself have had great results with.Since you feel your Shocker was not tuned right to fit your needs.

Debounce (green) a safe setting is 2-3 blinks.
Dwell (purple) 12 - 14 blinks for the Parker Noid / Humphrey noids between 14 - 16 blinks
AMB (blue) set this at 3 blinks
ABS (red) between 5 - 6 blinks reduces or eliminates FSDO

Now these settings work great in the 6.1 version software,and I think the only difference between the older version and 6.1 that concerns your year Shocker is the AMB setting where it has between 1-5 blink settings where the older version did not. And being your SHocker is an 06,in a perfect world yours should have came out with a Humphrey noid. Hope this helps you,I know it has for many Shockers I have tuned.
Cold Steel SL8R - Midnight Stealth SL94-
www.titanspaintball.com MVT 2009 Viper RTS Sherwood Forest
0

#5 User is offline   pigtech 

  • Forum Member
  • PipPip
  • Group: Members
  • Posts: 236
  • Joined: 26-June 06
  • Location:Palm Bay, FL

Posted 03 January 2008 - 11:59 AM

Best thing to do is optimize the dwell for your particular gun, rather than rely on someone else's settings. Bolt, o-ring wear, solenoid model, etc., can all affect what is the best dwell for your gun.

The Shocker NXT manual explains how to optimize the dwell setting for your gun (works the same for an SFT) and you can download that from SP's web site.

I also go through the proceedure in this video on the NXT, at about 30 minutes into the vid, in the section on electronic adjustment:
http://www.pigtv.net/?bcpid=348382059&...ctid=1155254617

Pretty much, most everything in that video applies to the SFT as well, since the markers are so alike.
Bill Mills, Technical Editor, WARPIG.com
0

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users