Special Ops Paintball: DXS Pulse Loader with Speedfeed - Special Ops Paintball

Jump to content


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

DXS Pulse Loader with Speedfeed Rate Topic: -----

#1 Guest_Schecter_*

  • Group: Guests

Posted 23 May 2010 - 05:52 PM

Okay, before I start off let me say internally and mechanically wise, this hopper is spotless. No problems feeding, no feedneck cracks, no electronics problems, nothing wrong with the drive cone, still feeds 20+ bps just like it came from the factor.

The shells on the other hand could use some work. After constant abuse it's started to fall into disrepair, the tabs that hold the drive box in have broken off, the box stays in unless it receives a big shock, I put some electrical tape to keep it together and haven't had much of a problem.
I don't have the stock lid, it didn't come with one, however the attaching tabs are still in place and I think it accepts halo lids.
None of the screws are stripped and the speed feed is still in good shape.
A piece at the very bottom of the feedneck has broken off but there are no cracks around or on the feedneck.
The hopper is clean and well maintained after every game, the shells are just in bad shape.(if you don't mind electrical tape it should give you years of service.)
The only thing really wrong or worth worry about is the tabs holding the back tray in place.
I do not have the RF chip, however there is a link to buy one here(click me)

Now, I'm not expecting miracles(though if you want to trade it for a rotor I won't turn you down) but I was hoping maybe a torque, 18v fasta, reloader B, some kind of force feed loader. Preferably the lighter kind. torque would be best case scenario.
I don't have money to add, so what you see is what you get.
If you've got the money for some new shells and want a pulse this is your ticket.
I'm sure you want pictures
Posted Image

and some more in hyperlink form
http://icanhasimage....4r8mfi94u9n.jpg
http://icanhasimage....0zv4kkstjln.jpg
http://icanhasimage....7a788tdz2wo.jpg
http://icanhasimage....7bg0bq0eudc.jpg
http://icanhasimage....8xk6jox2k30.jpg
http://icanhasimage....3v35s32owe3.jpg

This post has been edited by Schecter: 23 May 2010 - 05:54 PM

0

#2 User is offline   Josh_W 

  • AKA: Bulldog
  • Pip
  • Group: Members
  • Posts: 39
  • Joined: 13-May 05
  • Location:Columbus, Ohio
  • Brigade Name:Bulldog

Posted 30 June 2010 - 11:02 AM

Is this still for sale? What's the asking price?
0

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users