Sp1 trigger problem
Posted 10 January 2008 - 11:52 PM
Thanks in advance
Posted 11 January 2008 - 11:12 AM
Check 2 things:
a. If you overtighten the top screws that hold the grip on, it tends to pinch the triggle assembly a bit causing this.
Losen the top screws holding the grip on just a little bit.
b. Be sure that the battery wire or battery is not hitting the trigger assembly. If you open up one side of the grip and pull the trigger, you'll see there's a piece of the trigger that does enter the battery compartment. I use a small piece of foam to hold the battery down away from the trigger, and to keep it from rattling around.
Work hard, play hard.. In that order.
Posted 11 January 2008 - 01:03 PM
The first time I took mine apart and put it back together I was having this problem. In my case it was the battery wire. Its something simple...just take it apart slowly and keep an eye on what it could be.
Posted 12 January 2008 - 01:22 AM
This post has been edited by army 4 life: 12 January 2008 - 01:37 AM