resurrect the ProConnect 3 style remotes!
Posted 20 December 2008 - 06:04 PM
It is an all-in-one slide check/QD connection that is smaller than the more common and prevalent QD and separate slide check setups.
With is smooth, all in one design and that it has been an object of legend and obscurity for over a decade, is it possible for S.O. to bring it back? Or something like it? For a decent price instead of the $65 the old PC3's cost?
Posted 23 December 2008 - 12:57 PM
This thing needs to be revived, please! These things have been the elite in connections for almost as long as I have been playing (1st saw one in 94), but as I mentioned above were cost prohibitive then and were buried by the cheaper (then) slide checks/QD combos.
The name of it was the Pro-Line Pro-Connect 3
Posted 24 December 2008 - 08:42 PM
Posted 25 December 2008 - 12:11 PM
Number of downloads: 8
The SC/QD rocks in that it is integrated into one piece of steel and is very compact. By removing a couple compression rings, I can take off the QD ring, slide the check ring off and replace all the o-rings (Two tank o-rings for the slide check). This isn't something you want to do with out a proper work space as when you slide off the QD ring, the retention BBs can fall out. There is also a small spring. But, being able to rebuild it is priceless, even though it is a little difficult.
Number of downloads: 6
The Pure Energy adapter/on/off valve is another good part. I've had many remotes fail over the years because that o-ring fails and they leave you with no way of replacing it. This is experienced by leaking around the knob. This particular Pure Energy model has a metal knob, and a stainless valve pin. It is key because it allows you to remove a nut that holds that o-ring and valve stem in place. I bought replacements from Home Depot and, whenever it starts to leak, throw a new o-ring in there.
Posted 30 December 2008 - 10:23 PM
This post has been edited by druid: 30 December 2008 - 10:25 PM
"Political correctness is a doctrine, fostered by a delusional, illogical minority, and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end."
Posted 03 January 2009 - 03:58 PM
Posted 09 February 2009 - 09:46 AM
I am currently selling the Proconnects for $45 shipped anywhere on USA soil. Anyone out of country, please add $5. I have a running list over at the A5OG Proconnect thread.
Here are a couple pics of what I believe we are talking about here:
*size comparison pic to a slide check assembly:
Just shoot me a PM, or email me at email@example.com to place an order. Bulk orders of 10 or more will warrant a discounted price!
Posted 24 February 2009 - 12:27 PM
Posted 08 May 2010 - 06:59 AM
The above link. Ah yes, the Proconnect III. I love it that people are marketing it as the Proconnect when it is not even close. What is pictured in that link is the Warlock coupler. China made. Knock off. Don't get me wrong, the price is right for the Proconnect concept, but not even close to the same quality. I'm a dealer for both products, if that makes any sense. lol
ProConnect: Made by Staubli Corporation. The same coupler that was on the market 10-15 years ago. I have reports of them lasting well over 10 years before needing any service at all. Staubli claims that they are non-serviceable, but some have replaced the main o-ring in it already. I have used mine for over 3 years now hook after unhook many many times.
Warlock: Cheaper! China made. The thing is great for a baller on a budget, but bear in mind that you will have to replace the o-rings quite frequently. They come with extra o-rings right off the bat.
Now, the biggest reason I went looking for a different coupler was because I was sick of replacing o-rings in my slide checks all the time. The ease of use, and the simplicity of the Proconnect is what caught my attention. So I'm not sure why one would want to get rid of a slide check, just to use a couple of a little different design that you're going to have to replace o-rings all the time anyways.
Within the last year, the cost of the Proconnects has gone up to $55 shipped in the USA. We sell about 20 a month of each. The Proconnects go out, and people call back wanting more. The Warlocks go out, and people call back needing o-rings.
Don't get me wrong, the Warlock isn't a BAD product. It's just not a Proconnect. Still does the same job, but with more maintenance.
I hope that helps answer any questions.
Posted 16 June 2010 - 09:27 PM
few more recent sites....
the Pro-connect's current site, face book, youtube channel
where to buy a pro-connect for a reasonable price