Posted 08 May 2010 - 02:10 PM
(This is on the default board that comes with it, if you upgraded to a dif. board, look it up in the board manual)
Alright, in order to change your fire setting, you must open the grip panel and set both DIP switches into the ON position, this will set the gun into config mode.
Now, turn the gun on, and the led at the back should cycle through all the colors to show that it is in config mode. To go from option to option, you must pull and release the trigger. The color code for the fire mode of an SLG is YELLOW. Once you have the correct color lit, pull and hold the trigger until the LED starts to flash. The LED will flash as many times as the previous setting was before hand, and then go dark. Once that is done, pull the trigger as many times as you want the setting to be. The setting for NXL is 4, so when you get to the firing mode option and are setting it, pull the trigger 4 times once it stops flashing. It should then cycle through the colors, showing the settings were saved. Once that is done, turn the marker off, and take the DIP switch on the right side (side closest to the power button) and turn it off.
When in the correct playing set-up, the first switch should be up, and the second should be down.
This post has been edited by Private Silver: 08 May 2010 - 08:20 PM
SO Feedback +2/ E-bay feedback +14