68 carbine Q Loader
Posted 29 March 2009 - 01:48 PM
My question is could I put a Q Loader on it, and if so how would that work (the attaching it to the gun part)
Thanks a lot
Probably by gettting the CMS kit and using the bracket to fit to the marker instead of the conventional round fitting to an ASA.
No special hose fittings are essential as the feed is conventional.
There is also the option of removing the feedneck and making a custom feed, or direct mounting the QLoader with a custom fitting straight into the feed.
Posted 29 March 2009 - 03:31 PM
CMS is the 'Custom Mod Socket' from QLoader
When I said ASA I realy meant the vertical regulator, as standard QLoader setups are attached to the regulator or a vertical grip.
An ASA is the 'Air System Adaptor' that a bottle is normally screwed into.
The standard clamp is based on this mount:
The QLoader CMS components are these:
It's also possible to have a custom block mount like the SpecOps QBow mount:
This post has been edited by Tommikka: 29 March 2009 - 03:39 PM
Posted 29 March 2009 - 07:43 PM
Pictures and explanations, that's what I needed. Thanks so much for making sure that I was understanding what it was that you were telling me. Some people do a good job at explaining, and other do not. I appreciate the effort greatly.