This post has been edited by AK TOTIN: 14 August 2007 - 01:15 PM
Best Close Rnage Realistic Marker Any gun can be recommended just back it up with facts
Posted 14 August 2007 - 01:29 PM
I guess you could try an X7 MP5... thing. But most milsim paintball guns look like crap anyway. Just buy an Ion (even though I hate Smart Parts). They're fast, quiet, and small. Unless you can afford a Tac-One.
And I'm assuming you're using HPA.
MacDev 06 Cyborg, AGD Tac-One
Death before Smart Parts Feedback
Posted 14 August 2007 - 04:02 PM
95% of people with a flatline think it makes the gun more inaccurate. if you are the other 5% who take the time to sit down and tune it right put this in your sig.
Posted 14 August 2007 - 08:50 PM
Arsenal: Ion, Tipp M98
Big Fan of the P90 and will do an airsoft/Ion mod of one someday soon.
Posted 16 August 2007 - 03:54 PM
I prefer to take you out and move on then get in a fire fight.
Posted 17 August 2007 - 08:04 AM
Also can fire pretty fast.
This is my signature. There are many like it but this one is mine.
PM Me if you want to know why my signature is legal...Its actually the most reported thing on the forum these days -Tenacious
Posted 21 August 2007 - 12:04 PM
Yo pertenesco al Guerrero que de lo Antiguo se fuciona a lo Nuevo. Maj. X, Callsign: Matrix
As I walk through the Valley of Shadow of Death, I shall fear no Evil, for I am the meanest Creature in the Valley. Gen. Patton
Posted 21 August 2007 - 01:22 PM
Do you mean a smaller sized marker?
Ion would be a good choice, small and light.
<!--colorc--></span><!--/colorc--><!--coloro:#000000--><span style="color:#000000"><!--/coloro-->2004 AKA Viking - Delrin Bolt Pin - Fbm Sling trigger - Eyes - CCM Feedneck - Tadao Board- Sonic ASA/Hybrid Rail<!--colorc--></span><!--/colorc-->
<!--coloro:#0000FF--><span style="color:#0000FF"><!--/coloro-->Spyder Imagine Select [Homemade Low Pressure] - Drilled ASA - Drilled Valve - Polished Internals - Lightened+Polished Bolt - Lightened+Polished Striker - CCM Feedneck - SP on/off + S.rail - SP AA Barrel - Halfbacked<!--colorc--></span><!--/colorc-->
<!--coloro:#2F4F4F--><span style="color:#2F4F4F"><!--/coloro-->Polished Pre2k PGP - SP Wood Grips<!--colorc--></span><!--/colorc-->
Posted 26 August 2007 - 06:26 AM
X-valved automags can be pretty nasty. Deadly accurate, rugged, and if you throw an HPA tank with adjustable output and set it to around 900-1000 PSI you get some crazy bounce, plus there are other ways to make it fast (E-mag, Devil Mag, Pneu mag, ULT, I-mag, Spydermag). You can either get a tac one which is sort of mil sim, or you could do some custom stuff to your gun.
Ions fit nicely into milsim bodies too, so again, a custom milsim Ion would also work, as would an SP8 (which is basically an ion pre-milsimed)
Tippman makes milsim stuff for all thier guns, all have the option of E-grips and RTs, so thats how you can get yout 8+BPS
Of the above options I can rocomend the automag above the other two with confidence, it's a much nicer gun.
Also, if your willing to do no milsim, you will have some MUCH better options out there. And custom work is cooler than stoor bought mil-sim stuff any day, just so you know.
So you want to know why it's called an A5?
If I could assemble a new regulator for a paintball gun, I could build a liver. How hard could it be?
I'll bet you $10 the above post is telling you to buy an automag.