Special Ops Paintball: GuerrillaAir Bottle regulators - Special Ops Paintball

Jump to content


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

GuerrillaAir Bottle regulators

#1 User is offline   druid 

  • Celtic Warrior - Mo Anam Cara
  • PipPipPipPipPip
  • Group: Members
  • Posts: 2,420
  • Joined: 24-March 05
  • Gender:Male
  • Location:610 PA
  • Brigade Name:druidsdecendant

Posted 31 October 2007 - 09:24 AM

About 8 months ago I bought a (Click ME) GuerrillaAir FUKU Bottle Regulator and it was shipped via the dreaded DHL. I got the reg within 3 business days, so that was a plus (for a change). The box was perfectly square and the reg was securely packaged in a plastic blister box, in packing peanuts.
I took it out and mounted it on my 88/45. I'll get pics of it later but it came out of the pack, a great looking reg.
The machining was top quality and the anno was perfect. This reg is about as long as the old AA/Armageddon regs of yesteryear.
Installation is easy enough but for those that are unfamiliar with tank reg mounting, you should have your proshop install it. There's a dive shop here that slow-fills my bottles (the Proshop flash-fills them) and it's initial fill was made to see if it holds air in storage. While the bottle was still warm, the gauge read 4600 psi. After the bottle cooled it read slightly lower than 4400 psi. Checking the bottle every other day for 2 weeks....it held every bit of cooled air that was in it.
Playing with it...it's a better reg than I'm used to. My renegade field's not too far from me and we set up a quick game so I could test it. I've used it with my Stage 5'd Ion set to 20 bps ramping, Tippmann M98, 68 Magnum, Trracer and lastly, my Classic Mag.
On the Ion, there was absolutely no shoot-down that I could detect. It was fast and furious to say the least.
The M98 (being the gas hog that is it's nature), ran just as smoothly.
The 68 Magnum is a bit of a different story...it doesn't like HPA and never did - but it seemed to run ok with this particular reg (as opposed to a Crossfire and MaxFlo) even though it wasn't as astounding as it is on CO2.
The traccer liked it ok and the Mag runs great on it.

So after using this one and liking it a lot, I decided that I'd replace my MaxFlo in-line with another reg. The MaxFlo's on my 114/45 and set up for remote. I go to Guerrilla's web page and see that the (Click Me) Myth, that is normally $99.95, is on Halloween sale for $64.95 - Oh yeah...this I gotta try.

So I ordered the Myth. Same thing applies about shipping/boxed appearances. Opening the pack, I'm like Dirty Acronym?!...........this thing is TINY! It looks good, don't get me wrong...but man, is it smmmmmmaaaaalllllllll...

I took 3 pics of it so you can see. I used a yellow thread protector and a U.S. Quarter to show size reference. It looks funny on the 114...lmfao. I have not yet filled it with air but will later this week.

With the supplied nipple cover:
Posted Image

Nipple cover removed:
Posted Image

On a 114/45:
Posted Image



http://guerrillaair.com/store/product_info...products_id=218
Warped A5; M98; 68 Magnum w/ AGD 6-Pack, Automaggot #92 Custom Modder #5
"Political correctness is a doctrine, fostered by a delusional, illogical minority, and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end."
I got my OWN smiley...
0

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users