What Cockers can run on CO2?
All non-Electronic cockers. WGP recomends you use an Anti-syphoned tank.
What's an Anti-Syphon tank?
Warpig's Anti-Syphon page
What's a cockers normal operating pressure?
Around 350 PSI +/- 50 PSI.
Should I get an HPor LP HPA?
Both will work.
How do I build a cocker?
Otter's how to build a cocker page
How do I "sweet spot" my reg?
Moody's Sweet Spot
How do I time my cocker?
Timing Game Timing Video
What about E-Blades?
Moody's E-blade timing
What's the difference between cocker models by years other than milling?
The '97 change- Air chamber enlarged
The '98 change- Air chamber deepend making old Nelson valve springs worthless
Sear lug added to trigger frame, submitted by Acesn8s
The 2000 change- Banjo bolt redesigned changing the banjo bolt, body, and front block. New back block with new pull pin location requiring new bolts (Old bolts and back blocks combos will work on newer body's and visa verse)
The '03 change- Switch to hinge triggers, Right Feeds discontinued
The '04 change- P-blocks
What's a short stroke?
Its a failure to completely pull and release the trigger through a complete cycle. It can cause double feeding and chopping.
How do I aviod short stroking?
Three options: 1. Get an E-Frame. 2. Work on your techinque. 3. Tune your cocker to compensate for your shooting style.
How do I tune my cocker?
How do I trouble shoot my cocker?
Moody's trouble shooting
Ask here at Spec-ops, PBReview, or PBNation
Where to get After market parts and upgrades?
Several places on-line carry them: I like Complusive the best.
Why does everyone say to get a barrel kit?
Cockers are closed bolt, so in the normal "rest" position the paint is no longer being held by the ball dents but is in teh barel. If the paint to barrel fit is not good the paint may roll out ofthe barrel entirely, or roll away from the bolt face causing a velocity drop.
What parts can't be shared by a full sized and a mini cocker?
Actualing rod, ASA, Pump arm, and Body.
What must I do to go from a hinge to a slider trigger?
Reverse the hosing on the 3-way.
Hinge (from back to front) Ram close, LPR, Ram Activate/Open
Slider (from Back to front) Ram Activate/Open, LPR, Ram Close
This post has been edited by Meline: 16 October 2006 - 03:53 PM